preformance clutch selection help

Questions about axles, transmissions, differentials, pretty much anything that connects the engine to the wheels, this is the place for those questions.
Post Reply
neon=ferrari
1GN Registrant
Posts: 28
Joined: Thu Jan 12, 2012 4:45 pm
Location: windsor, ny

preformance clutch selection help

Post by neon=ferrari » Sun Jan 29, 2012 9:05 pm

I will be making around 300 or more horse power and idk what clutch to get help please. can I get away with using an 2001 pt clutch?
1995 neon $300 + dirt track 1995 dohc 2.4 swap neon with 300+ hp abs disk brakes front and rear sway bars = ferrari

BaLLisTiK
1GN Registrant
Posts: 661
Joined: Tue Sep 21, 2010 10:31 pm
Location: New Port Richey, FL

Post by BaLLisTiK » Mon Jan 30, 2012 2:40 am

2.7 Stratus clutch.
PensacolaRebel might have a p/n for you, he just replaced his with that one.
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.

neon=ferrari
1GN Registrant
Posts: 28
Joined: Thu Jan 12, 2012 4:45 pm
Location: windsor, ny

Post by neon=ferrari » Mon Jan 30, 2012 2:55 pm

Ok thanks
1995 neon $300 + dirt track 1995 dohc 2.4 swap neon with 300+ hp abs disk brakes front and rear sway bars = ferrari

User avatar
PensacolaRebel
1GN Registrant
Posts: 70
Joined: Mon Aug 01, 2011 10:43 pm
Location: Pensacola, Florida

Post by PensacolaRebel » Mon Jan 30, 2012 4:46 pm

It looks like the non-self-adjusting PT clutch, but its not. Its SACHS modular clutch for a 2003 2.7 Stratus RT. Heres what I have on it so far:

Flywheel OD = 10.555in Flywheel Thickness = .815in Disc OD = 9.0625in Disc Thickness = .305in Weight = 21.9lbs Overall thickness, from "feet" to cover = 2.445in Est. minimum torque holding = 200ft/lbs Aproximate Price = $250

LUK Part # 05-119 SACHS Part # K7029601 RHINOPAC Part # 05119 - rebaged LUK EXEDY Part # KDG04 BRUTE POWER Part # 92638
'96 SOHC ATX sedan
'97 SOHC MTX coupe
Image

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Tue Jan 31, 2012 11:08 pm

I don't think the 2.7 clutch will hold 300 hp...
Image
Image

User avatar
1genRTturbo
1GN Registrant
Posts: 468
Joined: Sun Feb 28, 2010 5:20 pm
Location: Tooele, ut

Post by 1genRTturbo » Fri Oct 19, 2012 12:50 pm

an srt modular will... if they are.
It's not the fall that hurts, it's the sudden stop at the bottom!

srt4eh
1GN Registrant
Posts: 496
Joined: Sun Nov 16, 2008 12:56 am
Location: Schofield Barracks, Hawaii

Post by srt4eh » Sat Oct 20, 2012 1:53 am

ACT DN2-HDSS will hold that power perfectly. Vitor runs one in his srt4 swapped 1gn and a couple others do as well. I just bought one for my swap too
98 Neon R/T, 00 Neon, 06 Jeep GC SRT-8
Image
Image

Post Reply