NYG ACR 2.2 stroker Turbo Drag Car MI

Trying to sell your Neon and want to get the word out, maybe someone on here would like to buy it from you. Post your Forsale Ad here.
sheldo13
1GN n00b
Posts: 9
Joined: Tue Jun 21, 2011 10:12 pm
Location: Blissfield MI

NYG ACR 2.2 stroker Turbo Drag Car MI

Post by sheldo13 » Tue Jun 21, 2011 10:19 pm

1995 NYG ACR car SD262737
Built 2/20/95 hour 06
In-Service Date 7/11/1995
Sold new by O'Hara Chrysler/Plymouth/Dodge in Clinton, Michigan.
Built with A/C, radio and quartz gray interior

(slicks and skinneys not included)

$3500
old project log viewtopic.php?f=51&t=273911&start=80

video
Image


Image
Image
Image
Image
Image
ImageImage
Image
Image
Image

This car has been my project for the last 5 years, I don’t see myself finishing it anytime soon, I would love to see somone finish it and race it rather than me part it out.

The car runs and drives I never had the chance to get it tuned. The tec2 will shut the motor down electricly after about 1 min of running. I sent the tec2 in for survice they said there was nothing wrong with it, and that it might be interferance from the fule pump thats shutting the car off. Thats where i left off over a year ago.

The motor less 100 miles have most of the receipts
Crower Rods
Crower turbo cams
Crower Springs and ti retainers
PT valve train
JE pistons (8.5:1)
Callies Stoker Crank
Ferrea Stainless Valves
ARP studs all around
Indy Manifold
Indy CNC ported head have the flow numbers
60 mm Modern TB
750cc injectors
Stainless log turbo Manifold
Moroso oil pan
Unorthdox cam gears
Garret t4 turbo with .68 ar exhaust
Tial 35mm HP wg
TurboSmart BOV
Highflow oil pump
Spreco intercooler.
Electamotive tec2 standalone
Odyssey mini batt

Fuel System
All contained under the hood
1 gal cell
Areomotive 800hp pump
Areomotive 1:1 regulator
All A/N fittings

Drive Train
3.94 Acr trans
Turbos Unleashed modded OBX Diff
DSS stage 3 axels and hubs
100% new 0 mile brakes
New Chrysler brake lines hard and soft

Chassis
Rust free
Fiberglass bulge hood and deck lid
S/W 10 pt cage
Fiberglass doors and lexan windows
Prothane bushings
Racing seat and harness

Misc
AEM wideband
Autometer and Jeggs Gauges
Suspension components blasted and painted

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Tue Jun 21, 2011 10:33 pm

Wow, I wish I hadn't just bought the tools and stuff I just did. GLWS, amazing car.
Image
Image

BaLLisTiK
1GN Registrant
Posts: 661
Joined: Tue Sep 21, 2010 10:31 pm
Location: New Port Richey, FL

Post by BaLLisTiK » Thu Jun 23, 2011 12:07 am

Wow that's sexy.
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.

User avatar
18dustin
1GN Registrant
Posts: 81
Joined: Thu Nov 11, 2010 11:08 pm
Location: Cleveland, TN

Post by 18dustin » Sat Jun 25, 2011 1:20 am

where are you from? im from tennesee just seein where we could meet im really interested in this
Image

sheldo13
1GN n00b
Posts: 9
Joined: Tue Jun 21, 2011 10:12 pm
Location: Blissfield MI

Post by sheldo13 » Sat Jun 25, 2011 11:14 am

Blissfield MI 49228 South of Detroit north of Toledo

I don't have a truck or trailer to transport the car.

Call if you want more info 517-673-2334

sheldo13
1GN n00b
Posts: 9
Joined: Tue Jun 21, 2011 10:12 pm
Location: Blissfield MI

Post by sheldo13 » Tue Jun 28, 2011 9:11 am

3300 last chance before i cut it up

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Tue Jun 28, 2011 9:32 pm

Cut it up? =( I really want it, just so that it gets salvaged.
Image
Image

User avatar
metal_gear_jon
1GN Registrant
Posts: 559
Joined: Tue Feb 13, 2007 7:12 pm
Location: Cincinnati, oh

Post by metal_gear_jon » Thu Jun 30, 2011 8:26 pm

2drSRT4 wrote:Cut it up? =( I really want it, just so that it gets salvaged.
Quite sure he means a part out.

Worth more in pieces.

Bet the shell will come up eventually.
'98 Alpine Green Coupe turbo fodder
Image
^ Not mine...

http://www.tristateneons.org/ never forget...

Have a lol

Feeding the trolls since '07

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Fri Jul 01, 2011 12:38 am

metal_gear_jon wrote:
2drSRT4 wrote:Cut it up? =( I really want it, just so that it gets salvaged.
Quite sure he means a part out.

Worth more in pieces.

Bet the shell will come up eventually.
Yeah, I figured a part out, but I would love the car in one piece..
Image
Image

BaLLisTiK
1GN Registrant
Posts: 661
Joined: Tue Sep 21, 2010 10:31 pm
Location: New Port Richey, FL

Post by BaLLisTiK » Sat Jul 02, 2011 1:38 am

I would love the car in one piece too...

I would love some of the pieces that are on he car too though. lol
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Sat Jul 02, 2011 9:10 am

I wish I could just buy it. Then go bracket racing locally and blow the doors off the Hondas
Image
Image

User avatar
18dustin
1GN Registrant
Posts: 81
Joined: Thu Nov 11, 2010 11:08 pm
Location: Cleveland, TN

Post by 18dustin » Mon Jul 04, 2011 5:15 pm

how much for the motor, trans, axles, hubs, and all the turbo stuff shipped to 37323??
Image

sheldo13
1GN n00b
Posts: 9
Joined: Tue Jun 21, 2011 10:12 pm
Location: Blissfield MI

Post by sheldo13 » Tue Jul 05, 2011 11:27 pm

2500 if you come and pick it up im not real sure on shiping an engine

sheldo13
1GN n00b
Posts: 9
Joined: Tue Jun 21, 2011 10:12 pm
Location: Blissfield MI

Post by sheldo13 » Tue Jul 05, 2011 11:28 pm

price drop $3100 somone come and get this thing

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Wed Jul 06, 2011 9:48 pm

Anything special about the suspension? If you do decide to part out, I would like the suspension and brakes.
Image
Image

Post Reply