SloUSDM20 is staying NA...
SloUSDM20 is staying NA...
Okay. I swapped the DOHC in and now this Summer Im going to build the head up with cams, springs, and finish the port work. I have Crane springs, an OBX header(I may be working to get a kirk or OBX LTH). I know I said i was gonna boost but I dont know...so im staying NA. and this set up without the spray will seem more reliable til I get my DD...
Crower Stg 3 Cams
Crower valvesprings
OBX Mid-Length header(for now...)
90* less intake
Jeep 60mm TB
ARP rod bolts
Mopar PCM
wideband O2
Fidanza cam gears
PT clutch--*coming in April*
Built block-10.5:1 CR
ARP head bolts
50-shot NX wet kit--*more toward the end of summer*
Crower Stg 3 Cams
Crower valvesprings
OBX Mid-Length header(for now...)
90* less intake
Jeep 60mm TB
ARP rod bolts
Mopar PCM
wideband O2
Fidanza cam gears
PT clutch--*coming in April*
Built block-10.5:1 CR
ARP head bolts
50-shot NX wet kit--*more toward the end of summer*
Last edited by SloUSDM20 on Mon Apr 13, 2009 3:55 pm, edited 5 times in total.
[One of 1gn.org's first 50] Member #41
2.4L DOHC Naturally Aspirated
Crower Stg 3 Cams, Crower Valvesprings, and more...
- neon_freak
- 1GN Registrant
- Posts: 521
- Joined: Wed Feb 14, 2007 5:57 am
- Location: Fond Du Lac, WI
dont forget injectors
95 strawberry coupe mtx sohc
pacesetter header/catback, sts, boogers, 3.0, atx tb, ported intake, mp ecu, solid bobble strut, magnecor wires
98 white rt coupe mtx 2.4
mopar ecu, egr kit. ur street pulley, mpx 60mm, iceman, msd wires/coil, solid mounts, ractive header, vibrant muffler
old 2.0-145.4hp@6161rpm, 134.5tq@5218rpm
pacesetter header/catback, sts, boogers, 3.0, atx tb, ported intake, mp ecu, solid bobble strut, magnecor wires
98 white rt coupe mtx 2.4
mopar ecu, egr kit. ur street pulley, mpx 60mm, iceman, msd wires/coil, solid mounts, ractive header, vibrant muffler
old 2.0-145.4hp@6161rpm, 134.5tq@5218rpm
Re: SloUSDM20 going boost...
24lb injectors and an SRT fpr isn't going to cut it. You need an FMU or MegaSquirt. 36lb injectors will work best. The stock clutch holds low boost levels just fine.SloUSDM20 wrote: parts I need...
24lb injectors
SRT4 FPR(58psi)
SRT4 turbo/manifold/O2 housing
boost gauge
IC piping
manual boost controller
BOV
MAP clamp
oil lines
tapped oil pan
vac lines
wideband O2
downpipe
should I pick up a nitrous kit for my car? I have a DOHC swap, OBX mid length header, all bolt ons, ACR PCM, ported head and intake manifold...Im sure to get mid-high 14s with a 50-60shot???
[One of 1gn.org's first 50] Member #41
2.4L DOHC Naturally Aspirated
Crower Stg 3 Cams, Crower Valvesprings, and more...
Yes, please dear god get rid of that unequal length shit. Get an OBX long tube, you'll thank me later.
Spray, it's fun, and you can get a kit for $300. $300 + $40-$60 to fill a bottle, you can't boost for that cheap.
Spray, it's fun, and you can get a kit for $300. $300 + $40-$60 to fill a bottle, you can't boost for that cheap.
2005 Neon SXT Black - SOLD
1998 Neon Coupe - SOLD
2004 Neon SRT-4 - 13.9@102
1995 Neon ACR NYG Sedan - 12.5:1 SOHC coming
1996 ACR Sedan - Koni yellows, stock as hell
Free Philly
1998 Neon Coupe - SOLD
2004 Neon SRT-4 - 13.9@102
1995 Neon ACR NYG Sedan - 12.5:1 SOHC coming
1996 ACR Sedan - Koni yellows, stock as hell
Free Philly
-
- 1GN Registrant
- Posts: 116
- Joined: Tue Jan 06, 2009 9:57 pm
- Location: st. cloud mn
SloUSDM20 wrote:should I pick up a nitrous kit for my car? I have a DOHC swap, OBX mid length header, all bolt ons, ACR PCM, ported head and intake manifold...Im sure to get mid-high 14s with a 50-60shot???
spray it you will be fine with a 50 you could probably go a 75 if you wanted to just not spray it as much. i will have a nitrous kit for sale very soon if you are looking for one let me know
98 r/t all motor 2.4 project with some itb's
98 cranberry expresso winter beater
98 cranberry expresso winter beater
Im gonna get the OBX longtube header in about a month. Im waiting on a shorty for the time being....Ill be picking up a 3.94 tranny and ordering a PT clutch in May as well. trying to get a second job to speed up the process.
by July, I should have the Crower 3/4 Race cams, Crower springs, OBX LTH, 3.94 tranny, PT clutch, finished head porting, and the modified HG...
by the way, how much you lettin your nitrous kit go for?
by July, I should have the Crower 3/4 Race cams, Crower springs, OBX LTH, 3.94 tranny, PT clutch, finished head porting, and the modified HG...
by the way, how much you lettin your nitrous kit go for?
[One of 1gn.org's first 50] Member #41
2.4L DOHC Naturally Aspirated
Crower Stg 3 Cams, Crower Valvesprings, and more...
-
- 1GN Registrant
- Posts: 116
- Joined: Tue Jan 06, 2009 9:57 pm
- Location: st. cloud mn
by the way, how much you lettin your nitrous kit go for?[/quote wrote:
i will let it go for 200 plus shipping and thats everything you need including bottle heater bottle blanket if you want it and autometer phantom nitrous gauge and 50 shot 75 shot and 100 shot and i think there is a 125 in with them all. let me know im going to use it for a while yet but by july or august i will be taking it out for my new set up
98 r/t all motor 2.4 project with some itb's
98 cranberry expresso winter beater
98 cranberry expresso winter beater
-
- 1GN Registrant
- Posts: 638
- Joined: Sun Mar 11, 2007 11:39 pm
- Location: Moro, Illinois
just got the OBX header, struts, dropzone springs and rear sway bar on and she ride like dream. cornering is like day and night. love it. I have some KYBs to throw on the front and Im pretty much done for the suspension. bushing kit coming soon.
next on list for the winter...cams and springs are on hold til then.
DOHC muffler*June
3.94*August/Sept
PT Clutch*Sept/Nov
suspension bushing kit*Dec
Crower 3/4 race cams and springs**Jan/Feb
next on list for the winter...cams and springs are on hold til then.
DOHC muffler*June
3.94*August/Sept
PT Clutch*Sept/Nov
suspension bushing kit*Dec
Crower 3/4 race cams and springs**Jan/Feb
[One of 1gn.org's first 50] Member #41
2.4L DOHC Naturally Aspirated
Crower Stg 3 Cams, Crower Valvesprings, and more...