Bringin' back the SOHC.

chipdogg · Post by **chipdogg** » Fri Sep 21, 2007 12:54 pm

Is that all you can come up with? My FSM is in my ACR somewhere, which is about 140 miles from here at the moment. Explain why those will cause a single cylinder misfire. Yes, some of them can cause a misfire condition but they will affect ALL cylinders, which is why you would have had him chasing random crap for a while.

Lackof · Post by **Lackof** » Fri Sep 21, 2007 12:58 pm

I'd rather not since this thread has nothing to do with it.
Get a life red headed step child.

chipdogg · Post by **chipdogg** » Fri Sep 21, 2007 1:03 pm

I got one, just have time to kill right now, work in an hour or so and nothing else to do.

You won't "prove" anything because you are wrong and you know it.

Lackof · Post by **Lackof** » Fri Sep 21, 2007 2:26 pm

No once again this thread isn't the place to discuss it.
If you would actually read, i said bring up the thread again.
There is also a pm box with my name on it that you can get access to via a link in my profile.

APN · Post by **APN** » Fri Sep 28, 2007 4:35 pm

The new motor:

chipdogg · Post by **chipdogg** » Fri Sep 28, 2007 6:42 pm

Put it in, what are you waiting for???

APN · Post by **APN** » Sat Sep 29, 2007 8:29 am

chipdogg wrote:Put it in, what are you waiting for???

Hoist today.

Lackof · Post by **Lackof** » Sat Sep 29, 2007 1:25 pm

so it finishes up today?

APN · Post by **APN** » Mon Oct 01, 2007 9:26 pm

Got the motor out today. Looks like I have some metal in my pan for some reason lol.

The other motor goes in when I get the clutch attached on wednesday.

Lackof · Post by **Lackof** » Mon Oct 01, 2007 11:23 pm

Surprises are fun!

I've had a couple of those over the years

neonboy96 · Post by **neonboy96** » Tue Oct 02, 2007 2:44 pm

Tyler wrote:haha. I didnt put a hg back on my car. I used alot of high temp RTV and its held awsome! Gaskets are overrated.

rvt is overrated lol all you really need is a can of copper spary lol

APN · Post by **APN** » Wed Oct 03, 2007 11:51 am

Skill wrote:Surprises are fun!

I've had a couple of those over the years

Screw surprises... i knew something was broken lol.

APN · Post by **APN** » Thu Oct 04, 2007 6:02 pm

Mounted the motor today... Wasn't too bad... Got pass side axle in, need to get new pins and still have to get half-shaft in. Then comes the wiring.

Lackof · Post by **Lackof** » Thu Oct 04, 2007 8:17 pm

good deal now finisher-up it's only 830 right now.

APN · Post by **APN** » Thu Oct 04, 2007 11:37 pm

Skill wrote:good deal now finisher-up it's only 830 right now.

Had a party to go to.