Page 1 of 1

Door moulding part #'s?

Posted: Thu Oct 22, 2009 12:21 pm
by XCLR8TN
Hey guys,

I recently took the door moulding off to clean up the rust underneath and paint it. They didn't stay on well before, and now they really don't want to stay on.

Does anyone have a part # or a price or somewhere to get them semi-cheap, preferably not used? It's a 4 door, btw.

I'll try and go to the dealer sometime this weekend, but wanted to see if anyone had any info on it.

Thanks

Posted: Fri Oct 23, 2009 8:47 am
by metal_gear_jon
Don't waste your time by replacing them. Just use 3M moulding tape to put them back on. It'll take awhile to get the old tape off the back, but it will work. And isn't it weird that if you let the mouldings sit on anything, they conform to it's shape in a day or two.

Posted: Fri Oct 23, 2009 8:59 am
by XCLR8TN
Ah, I should have clarified. I meant at the door tops, not window tops by the roof. I'm talking about the ones that seal the window to the door, not to the roof. Not the adhesive ones, just the ones that stick over the seam on the door top..

Posted: Fri Oct 23, 2009 6:29 pm
by metal_gear_jon
Ok, you mean the door belt stuff that always starts rust at the top of the doors when the clips scrape the paint.

Driver side:
Front 04658 935
Rear 05261 809

Passenger:
Front 04658 934
Rear 05261 808

These numbers are for 97-99 but I would think the 95 stuff got superseded by these.

Hope this helps, but I'm sure a junk yard would be cheaper than new.

Posted: Sat Oct 24, 2009 4:12 pm
by XCLR8TN
thank you!!!