8k tach
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
8k tach
okay i went to the pik n pull today and got a 8k tach and installed it. works fine buts its kinda jumpy any way to fix this?
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
should have resoldered all the connections on the back just to make sure before you installed it. Check all your connections.
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
ne piks of where to resolder
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
- Archametes
- 1GN Registrant
- Posts: 776
- Joined: Tue Feb 13, 2007 10:06 pm
- Location: Red Hook, NY
- Contact:
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
ahah thats fukn easy
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
so i resoldered the crap and the tach is fine but the speedo is still a lil jumpy
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
-
- 1GN Registrant
- Posts: 500
- Joined: Mon Feb 12, 2007 7:19 pm
- Location: Cape May Court House, NJ
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
ohh i didnt kno that, all the thing said was just reheat it, so remelt them all the way?
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
Ya you gotta remelt them. Heating them doesn't do shit till they melt and turn color.
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51
52 and counting, when will it stop?
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51
52 and counting, when will it stop?
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
can i just melt more solder onto them?
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
Ya but melt the original solder first, it should change color and you can add a little more. Don't add too much or it'll bridge and that's bad.
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51
52 and counting, when will it stop?
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51
52 and counting, when will it stop?
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
when i heated it the solder seamed to crack or split, what color would the shit change too
i also adjusted the mileage on the thing b/c i didnt have the right size torx head to switch em out. it got the job done
will i need rounded or inverted leds for the bulb switch?
i also adjusted the mileage on the thing b/c i didnt have the right size torx head to switch em out. it got the job done
will i need rounded or inverted leds for the bulb switch?
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
I dunno, you watch it and it takes a few seconds and it changes color, you pull iron away and it changes back. Both colors are like a silverish I believe.
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51
52 and counting, when will it stop?
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51
52 and counting, when will it stop?
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit