When installing it on my car I noticed a few things to make it easier to install. Install took me approx 30 min to do with power tools taking my time. It's not hard but power tools help alot to get the nut off and back on. I also used a little bit of heat from a MAP gas torch and the pulley slips right on and tightened the nut up.
I used to get the headlight dimming when my Air or heat was on at a idle as well as the radio I do not get that anymore. Car is working great with the new pulley on it.
We went a extra step compared to previous ODP's and had them Type III Millennium Hardcoat Anodizing on the pulley which is Extremely hard, dense and wear resistant aluminum oxide. The coating is Harder than tool steels, and the coating has the Corrosion resistance of STAINLESS STEEL! This process will ensure the product lasts and doesn't get ripped to pieces in a short amount of time like some other pulleys have been known to do.
If you have a UDP on your car now it's easy to figure out the belt size you will need to install it with this pully. You need 1 inch shorter then what you already have on your car. When I installed it on my car I I used a 1 inch shorter belt and it worked perfectly. Check the archives post on here for information about belt sizes for whatever pulley you are using and just get one inch shorter.
If you have any other q's feel free to ask.
I will also be giving free shipping on anyone that orders a fuel rail and a ODP together IN THE US ONLY CANADA OR ANYOTHER COUNTRY CONTACT ME FOR A SHIPPING PRICE but will be reduced!
You can buy the pulleys right on the site at www.lfsracing.com Just click on the first gen part and it will be the second item down in the list is the combo deal fuel rail and ODP for 204.99 with FREE SHIPPING and the Third item is just the ODP only for 65 shipped!
Belt size info below if anyone has a Megan racing UDP please e-mail me the belt sizes you are using for a SECOND GEN ONLY Both alt and PS/AC belts need to add those to the archives as well and list them in here. These are in the archives post but figured I would copy them to here as well since I am getting alot of q's about it.
Underdrive Pulley Belt Sizes
Cosmo Racing UDPLorenzo wrote:AFX UDP
95-99 Neons
Alt belt with LFSracing.com Altenator ODP Dayco 5040295 Gates K040295
ALT BELT WITH LFSracing Altenator ODP Dayco 5040300 Gatorback 4040300
[/quote]
MPX UDP
95-99
Altenator belt with LFSRACING Alt ODP Dayco 5040310
[/quote]
TTI UDP
95-99 Neons
ALT belt with LFSRACING ODP 295K4 Dayco 5040295
Unorthodox Racing UDP
95-99
Altenator with LFSracing Alt ODP Dayco 5040310 Gates K040310
Megan UDP
Underdrive Pulley Belt Sizesmnmattie wrote: Megan UDP
Alt belt WITH LFSRACING ODP Dayco 5040310
Lorenzo wrote: AFX UDP
2K Neons
Alt belt WITH LFS Racing Overdrive Alt Pulley
MPX UDP
2000+
Alt belt WITH LFS Racing ODP 5040295
Unorthodox Racing UDP
2000-01
Alt belt with LFS Racing ODP K040310
Thanks,
Lorenzo