turbo coupe part out

2001rt32 · Post by **2001rt32** » Mon Jun 21, 2010 1:04 am

Name- Justin Russo
location-lima OH
contact-pm
feedback http://forum.2gn.org/viewtopic.phpt=454 ... t=2001rt32

since my 1gn spun a rod bearing im parting it out. i don't have the time nor the money to rebuild it. all the parts are on the car so i dont have many pictures, i can try to get pictures.

my turbo setup: hahn manifold, super 16g turbo with a 10cm exhaust housing, o2 housing, down pipe with an electric cut out, srt injectors, srt intercooler, begi 2025 rrfpr, amm intake with the jeep tb, throttle cable bracket, the shorter cable for the intake, all the piping, oil lines, and the oil pan, only thing it wont have is a bov and fuel pump. the turbo has a decent amount of shaft play, the fins dont hit the housings. a rebuild kit for it is $89.00. im asking $850 plus shipping

aem cam gears in blue $50 plus shipping

2.0 dohc head that was ported on the exhaust side, needs valve seats to be done $50 plus shipping

dohc valve cover in gold $20 plus shipping

auto meter 30-30 boost gauge $20 the hold down rods were cut off behind it.

i want $500 for the shell, there is no rust 113,000 miles on the shell

teamtos · Post by **teamtos** » Mon Jun 21, 2010 9:08 pm

i want the cams and also the cover for the cams gears

Mikhail1gn · Post by **Mikhail1gn** » Sat Aug 28, 2010 2:39 am

Hey You Still Got The Cam Gears...L.M.K...Ill Get Them..

Ladi3sman55 · Post by **Ladi3sman55** » Wed Sep 01, 2010 3:36 am

selling front strut tower bar? if so how much? do you have rear?

neon_freak · Post by **neon_freak** » Thu Sep 02, 2010 1:28 am

cam gears 2.0 or 2.4?

Ladi3sman55 · Post by **Ladi3sman55** » Thu Sep 02, 2010 1:31 am

neon_freak wrote:cam gears 2.0 or 2.4?

i believe they are both. you can simply flip them iirc

1genRTturbo · Post by **1genRTturbo** » Thu Sep 02, 2010 9:37 am

what kind of fms are you running? Ms? i'd be interested in the harness and comp if you arent going to use or keep it.

neon_freak · Post by **neon_freak** » Thu Sep 02, 2010 6:26 pm

Ladi3sman55 wrote:
neon_freak wrote:cam gears 2.0 or 2.4?
i believe they are both. you can simply flip them iirc

you can with stock ones but iv never heard of an aftermarket one that does that

Ladi3sman55 · Post by **Ladi3sman55** » Fri Sep 03, 2010 1:35 am

i was thinking the crane cam gears i had you could do that with too.. maybe not though lol

98Sport5spd · Post by **98Sport5spd** » Sun Sep 05, 2010 11:17 pm

what parts do you still have, cause I am in Lima.

18dustin · Post by **18dustin** » Sun Nov 14, 2010 5:15 pm

would u let your turbo stuff go for any less?