throttle bodies, ignition coil MORE!!! short thorw!!!

Post any 1st gen Neon parts you have to sell here!
forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

throttle bodies, ignition coil MORE!!! short thorw!!!

Post by forrester1990 » Fri Sep 04, 2009 11:58 pm

name-michael forrester
location-robinson illinois
paypal- michael_forrester09@hotmail.com
have some parts for sale and i figured someone might need something. all prices ARE OBO and are before shipping so just pm me for a shipping quote

1st gen 3rd brake light( needs cleaned because someone slaped a sticker on it) $5 Image

1st gen taillights $15 each or $25 for a set.( 1 full set and 1 srivers side)Image
Image
SOHC valve cover$20Image
1st gen ignition coils.( i have 4) $20 a piece.( 2 for 1999 and 2 for 96-98)Image
Image
1st gen ATX throttle bodies( i have 3. 2 with sensore 1 without. $20 with sensore or $15 without sensors)
Image
1st gen airdam/grille painted orange$10
Image
accessorie belts 1 from crank to alternator, and 1 from crank to power steering/ac.$5 a piece or $7 for both
Image
Image
sohc intake maifolds with sensors( i have 4 of them)$30 a piece
Image
3 fuel rails with injectors. not sure if injectors are good. 1 is missing an injector$15
Image
Image
2 more throttle bodies with sensors$20 with sensors $15 without.
NEED THIS SOLD!
Last edited by forrester1990 on Sun Oct 04, 2009 3:13 pm, edited 6 times in total.

ThrIsNoSpork
1GN Registrant
Posts: 38
Joined: Fri Mar 13, 2009 1:17 am
Location: Antioch, CA

Post by ThrIsNoSpork » Sat Sep 05, 2009 1:16 am

pmed about 3.0L intake tube

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Sat Sep 05, 2009 1:51 am

pm'd back. anyone else interested in any parts? can get anything else just let me know!

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Sat Sep 05, 2009 11:23 am

3.0 tube pending!

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Sat Sep 05, 2009 11:48 pm

BUMP for new parts!! need these gone!!

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Sun Sep 06, 2009 2:45 pm

side note, 3 of the intake manifolds are for 95 wiring with seperate map/iats, 1 is 96+ with 4wire map/iat sensor :)
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Sun Sep 06, 2009 3:20 pm

thanks. i wasnt sure what years they were for
96 sohc mtx 2 door, powdercoated blue udp, 3.0 intake, blue valve cover, blue intake manifold, custom taillights, sts, front strut bar, dohc hood, fog light bumper, more to come

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Mon Sep 07, 2009 9:14 pm

part added
96 sohc mtx 2 door, powdercoated blue udp, 3.0 intake, blue valve cover, blue intake manifold, custom taillights, sts, front strut bar, dohc hood, fog light bumper, more to come

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Thu Sep 10, 2009 9:53 pm

PARTS ADDED> SHORT THROW SHIFTER!
96 sohc mtx 2 door, powdercoated blue udp, 3.0 intake, blue valve cover, blue intake manifold, custom taillights, sts, front strut bar, dohc hood, fog light bumper, more to come

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Sun Sep 20, 2009 1:53 am

anyone? need these SOLD!!!!!
96 sohc mtx 2 door, powdercoated blue udp, 3.0 intake, blue valve cover, blue intake manifold, custom taillights, sts, front strut bar, dohc hood, fog light bumper, more to come

keeders08
1GN Registrant
Posts: 516
Joined: Sun Jun 15, 2008 7:34 pm
Location: Pittsburgh Area(Connellsville), Pa
Contact:

Post by keeders08 » Sun Sep 20, 2009 10:38 am

Alluminum SOHC IM? yes no?
KEEDY/"KEEDERS"/"KUTTER"
Image

::95 Sprt Coupe::

::04 Gray Neon SXT::

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Sun Sep 20, 2009 12:48 pm

no all are plastic sorry man
96 sohc mtx 2 door, powdercoated blue udp, 3.0 intake, blue valve cover, blue intake manifold, custom taillights, sts, front strut bar, dohc hood, fog light bumper, more to come

keeders08
1GN Registrant
Posts: 516
Joined: Sun Jun 15, 2008 7:34 pm
Location: Pittsburgh Area(Connellsville), Pa
Contact:

Post by keeders08 » Sun Sep 20, 2009 1:05 pm

forrester1990 wrote:no all are plastic sorry man
Its cool buddy, just in case.. I also need jeep TB, and SOHC header if ya happen to have either.
KEEDY/"KEEDERS"/"KUTTER"
Image

::95 Sprt Coupe::

::04 Gray Neon SXT::

forrester1990
1GN Registrant
Posts: 37
Joined: Fri Sep 04, 2009 11:29 pm
Location: robinson ill

Post by forrester1990 » Sun Sep 20, 2009 1:08 pm

nah i jusy got regular atx throllte bodies.
96 sohc mtx 2 door, powdercoated blue udp, 3.0 intake, blue valve cover, blue intake manifold, custom taillights, sts, front strut bar, dohc hood, fog light bumper, more to come

keeders08
1GN Registrant
Posts: 516
Joined: Sun Jun 15, 2008 7:34 pm
Location: Pittsburgh Area(Connellsville), Pa
Contact:

Post by keeders08 » Sun Sep 20, 2009 1:11 pm

forrester1990 wrote:nah i jusy got regular atx throllte bodies.
$hiiiiit.. atleast i expect not to find what um lookin for. haha

Thx for the replies dood. PEACE
KEEDY/"KEEDERS"/"KUTTER"
Image

::95 Sprt Coupe::

::04 Gray Neon SXT::

Post Reply