parting out, all must go

Post any 1st gen Neon parts you have to sell here!
User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

parting out, all must go

Post by infil » Mon Aug 10, 2009 12:59 am

1995 SOHC All Motor car.

Mag head, light polishing with crane 14 cam, mag springs, aem gear, ARP header studs.

Would liek to sell the head, intake and header as a package as it performs remarkably well together.
Custom intake manifold, similar to the fast fabs intakes however with a few changes to make it more installer friendly. Magnum runner section with a custom box. Will include MPX 60mm TB, LFS Fuel rail with -6 an from the stock supply line and the tube sleeve and nut and all adapters to go from the stock supply line to rail. 19lb stock injectors.

Header is again similar to fast fabs, however reworked to fit the tunnel. Minimal rust on the header. Step tube design, 1 3/4-1 7/8 into a 3" dump. This is the setup that had me in the 13's on a factory SOHC bottom end.

Run on synthetic from day one, assembled with new parts, including the head casting, rocker shafts, rocker arms, springs, keepers, retainers etc.

Crane hi6-di2 ignition with tach adapters. This was purchased from lorenzo decaria on neons.org and has performed flawlessly for me since day 1. Has 2 selectable limiters. ALso have NIB TRC2 Timing retard control box.

Prothane side mount inserts
AFx Solid front mount
Booger Bobble strut

Image Performance Coilovers. Purple w/ yellow springs.
Some rusting on the sleeves however they will move. I have kept them lubed with PB/WD40. These do NOT include pillow ball mounts, they will come assembled and ready to drop in with stock upper mounts.

DSS Stage 3 axles with complete 5bolt knuckles. Make the install easier. Throw in the axles, bolt on the knuckles and your set. No pressing of the hubs/bearings to install. Installed with new mopar bearings and Long ARP wheel studs.

PT Transaxle converted for cable clutch. Purchased from darrel cox racing in 2003, has maybe 400 miles on it. Has run ATF+4 since day 1. Has phantom grip and diff safing tabs installed. Never ground, never had any problems with it. Will come with full set of booger bushings, new, heat wrapped shifter cables and shifter assembly if you like.

2.5" exhaust from header to muffler. This is not an exhaust I would consider streetable as it was rigged for events where we were required to run an exhaust. The rear hanger was welded to the muffler trackside with a flux cored welder and was not done very well, thanks to a friend who took it upon himself to get us track ready in a hurry. Dynomax piping and $20 track vendor bullet muffler. Was remarkably quiet and did not dramatically affect performance.

Nitto 205/50r14 drag radials mounted on 14x6.5 wheels. Relatively light weight. Fair ammount of tread left.

BFG 225/50r15 Drag Radials, tires only. Not mounted.

Scrothe 3pt rallye 3 harness in black. Minimal wear.

Autometer 13101 Fuel Pressure regulator with Autometer FPR gauge and sender, NIB with fittings and hoses. Gauge is silver on silver electrical.

Various other gauges and parts around, if you are interested ask. The car ran 14.02's on its last day at the track, good enough to win the event int he brackets at englishtown. The car was started recently and does run strong.

All parts are make offer, email me at infiltwb@verizon.net as I dont check here real often.

Pictures can be found on myspace at www.myspace.com/infiltwb and I can provide pix if needed. Everything on this car has to go. Make reasonable offers. Offering me $100 for the head is not going to get a response.

Buyer is responsible for all shipping costs. Crating charges on the transaxle, head and oversize items will be added in to the cost of the part or however we work it out. The more stuff you buy the more of a discount i'll be willing to consider. Pickup is always preferred but i have no problem shipping.

Any questions, feel free to email as I get emails on my blackberry all day and night.

cyas,
infil
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Mon Aug 10, 2009 1:24 pm

oh yeah, forgot i have a complete bottom end set minus rings for a 12.5:1 build with eagle rods, je pistons, all bearings, oil pump etc.

Have a set of total seal rings IIRC however they do not fit the grooves in the JE pistons.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

User avatar
neon_freak
1GN Registrant
Posts: 521
Joined: Wed Feb 14, 2007 5:57 am
Location: Fond Du Lac, WI

Post by neon_freak » Mon Aug 10, 2009 8:26 pm

so everything is make an offer?
95 strawberry coupe mtx sohc

pacesetter header/catback, sts, boogers, 3.0, atx tb, ported intake, mp ecu, solid bobble strut, magnecor wires


98 white rt coupe mtx 2.4

mopar ecu, egr kit. ur street pulley, mpx 60mm, iceman, msd wires/coil, solid mounts, ractive header, vibrant muffler

old 2.0-145.4hp@6161rpm, 134.5tq@5218rpm

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Tue Aug 11, 2009 5:34 pm

Yes, sorry, thought I worked that into the first post, my bad.
If u want, calling me is an option ill open up, 347-880-2940 is my cell.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Sun Aug 16, 2009 11:01 pm

Also found SPEC modular flywheel NIB. Was removed for fitment testing with a one-off clutch that didnt' work out. Flywheel was never installed in car. Includes all hardware.

Also didn't list:
AFX Race UDP(alt only)
Powdercoated Red 1gn SOHC Valvecover
Borbet Type S? 14x6.5 wheels
AFx Cuda style hood, gunmetal gray.

Everything still available at this time.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

User avatar
INVUJerry
1GN Registrant
Posts: 1472
Joined: Tue Feb 13, 2007 11:50 am
Location: Baltimore, MD

Post by INVUJerry » Sat Aug 22, 2009 9:27 pm

I'm really interested in the UDP and the AFX hood depending on the price you'd be able to do for me. Is it the same hood that was on your car?
2005 Neon SXT Black - SOLD
1998 Neon Coupe - SOLD
2004 Neon SRT-4 - 13.9@102
1995 Neon ACR NYG Sedan - 12.5:1 SOHC coming
1996 ACR Sedan - Koni yellows, stock as hell
Image
Free Philly

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Sun Aug 23, 2009 12:04 am

yup, same one :) call me bro :)
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

Echoalpha23
1GN Registrant
Posts: 101
Joined: Tue Jul 28, 2009 9:44 pm
Location: Clovis, CA

Post by Echoalpha23 » Tue Aug 25, 2009 12:09 am

can you send me pix of the scorth harness.... and go ahead and shoot me a price...

racer12306
Administrator
Posts: 726
Joined: Mon Feb 12, 2007 10:02 am
Location: Maryland

Post by racer12306 » Tue Aug 25, 2009 7:33 am

WHY NOW

For your sake I hope this stuff is gone when I'm ready. For my sake I hope it isn't :lol:
Please PM or email me if you see any issues with the site.

racer12306@2gn.org

fuzzyneon
1GN Registrant
Posts: 107
Joined: Sat Aug 29, 2009 11:58 pm
Location: snj

Post by fuzzyneon » Sat Aug 29, 2009 11:59 pm

pm'ed for crane box
1997 Dodge Neon Coupe 2.4L Stratus Swap + Fuel Upgrades, 3.0 Intake, Ps&Ac Delete, Mpx UDP , Mopar Performance ECU

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Sun Aug 30, 2009 4:21 pm

racer, i hope i have what you need still available :).

Fuzzy, got your PM about the ignition, and will get back with you on that as soon as i get back to new york.

Also to all others who have pm'd or posted, i'm up in maine on vacation at the moment, i will be back in new york 9/2/09 and will respond to all that i haven't responded to at that time.

I appreciate your patience, and will talk with you at the end of the week.

Thanks,
Infil

Again, feel free to call me/text me at the above listed number if you would like a faster response.

As of now:
Ignition system is pending.

UDP and hood are also possibliy pending.

Thanks alot for the intrest and any questions feel free to ask.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

TNK
1GN Registrant
Posts: 398
Joined: Mon Feb 12, 2007 9:30 pm
Location: Prosser, WA
Contact:

Post by TNK » Mon Aug 31, 2009 8:05 am

are you parting out just the motor, or the car as well? if the whole car, is it red, like your avatar shows? interested in the trunk if it's Flame Red and in good condition!
Image

Modify Your Car - Modify Your Body - Modify Your Life
WTB in NW: Clean 1g Sedan

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Wed Sep 02, 2009 2:20 am

everything must go, just like it says hehe. Its strawberry red.

Looks like ignition is spoken for pending payment.

The body is in overall good shape, I believe there may be a small dent or 2 on the trunk, ill have to look. I know the lights are all good except fo the clear corners that seem to come standard with leaks.

Engine is going to start coming apart when I can find the time to yank the head off, not going to guess on a time, however if its sold, itll be off within a day or 2 :)
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Wed Sep 02, 2009 2:21 am

echo, and jerry, pix coming over tomrrow :)
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

TNK
1GN Registrant
Posts: 398
Joined: Mon Feb 12, 2007 9:30 pm
Location: Prosser, WA
Contact:

Post by TNK » Wed Sep 02, 2009 9:56 am

:( damn. strawberry red is no good for me. thanks anyways.
Image

Modify Your Car - Modify Your Body - Modify Your Life
WTB in NW: Clean 1g Sedan

Post Reply