96 ACR Shell

Trying to sell your Neon and want to get the word out, maybe someone on here would like to buy it from you. Post your Forsale Ad here.
Red1996ACR
1GN Registrant
Posts: 47
Joined: Fri Jun 29, 2007 7:59 pm
Location: Waverly, NY, USA
Contact:

96 ACR Shell

Post by Red1996ACR » Fri Jul 06, 2007 4:46 am

Well. It's time to get rid of 'er. It's a day I dread. But I have to. I'm in a financial vice grips to the nuts, and need to sell some of my toys. And the ACR is first.

First off, yes it was wrecked, but it has a clean title due to the fact that I chose to keep it instead of selling it to my insurance company. I have all body panels for it, and they're all installed. I will deliver it within reason. i.e. within 100 miles of 14892 which is a LARGE radius. After that I'll charge 15 cents/mile.

My asking price for it is $400. Which is a major kick in the nuts since the repair parts were WAY more than that. the K-Frame alone was $300, the motor and trans were $400, all body panels were $150 total. I just need to get rid of some of my toys. All the rest are going too, but locally, except my truck, I can make *legal* money with that. So if anyone wants it, let me know. I'm open to offers on it. And if you want any of the stock parts I have with it, I have them posted in the parts section.
1996 Plymouth Neon ACR - http://www.cardomain.com/ride/724058/
2001 Chevy Silverado - 363ci 380 rwhp. (Swapped out to 383 stroker :: 350 bored out .40 and stroker kit)
1993 Chevy S10 - 4.3L Turbo (Syclone engine) with MTX Trans.
1988 Dodge Diplomat - 318ci with 3sp ATX trans.

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 4:07 pm

do you have any pics??

also if you are willing to deliver to michigan 49404 i will pay the extra

mileage
take it easy....... and if its easy, take it again!!

Red1996ACR
1GN Registrant
Posts: 47
Joined: Fri Jun 29, 2007 7:59 pm
Location: Waverly, NY, USA
Contact:

Post by Red1996ACR » Fri Jul 06, 2007 4:17 pm

Pictures are on my Cardomain link. Which is in my signature.
1996 Plymouth Neon ACR - http://www.cardomain.com/ride/724058/
2001 Chevy Silverado - 363ci 380 rwhp. (Swapped out to 383 stroker :: 350 bored out .40 and stroker kit)
1993 Chevy S10 - 4.3L Turbo (Syclone engine) with MTX Trans.
1988 Dodge Diplomat - 318ci with 3sp ATX trans.

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 5:39 pm

ahhhhh got em.

what all comes with the car??
take it easy....... and if its easy, take it again!!

Red1996ACR
1GN Registrant
Posts: 47
Joined: Fri Jun 29, 2007 7:59 pm
Location: Waverly, NY, USA
Contact:

Post by Red1996ACR » Fri Jul 06, 2007 6:18 pm

What's inside the car in the stripped pictures, plus seats (from and light weight rears) complete dash, all OBD2 wiring, under hood fuse box. Stereo System wiring (if you want it). I'll probably throw my remaining 3 ACR Wheels in with the car, someone stole one of them from the location where the car was sitting after I whacked the front of it. I only had one on the car the other 3 were at my parents house, that explains why there's only 3. Anything else you want with it from my PARTS post, just let me know, and we'll make a deal.
1996 Plymouth Neon ACR - http://www.cardomain.com/ride/724058/
2001 Chevy Silverado - 363ci 380 rwhp. (Swapped out to 383 stroker :: 350 bored out .40 and stroker kit)
1993 Chevy S10 - 4.3L Turbo (Syclone engine) with MTX Trans.
1988 Dodge Diplomat - 318ci with 3sp ATX trans.

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 6:29 pm

does the car have a full suspension??

the only thing else i would want is the sohc motor.
take it easy....... and if its easy, take it again!!

Red1996ACR
1GN Registrant
Posts: 47
Joined: Fri Jun 29, 2007 7:59 pm
Location: Waverly, NY, USA
Contact:

Post by Red1996ACR » Fri Jul 06, 2007 6:33 pm

The car does have full suspension. And the SOHC Motor is pending to a member on this forum. But if he backs out I'll keep it in the car, and continue putting the 96 sensors on it to make the 96 harness work with it. Or if he does buy it I can get another SOHC motor for it for little to nothing.
1996 Plymouth Neon ACR - http://www.cardomain.com/ride/724058/
2001 Chevy Silverado - 363ci 380 rwhp. (Swapped out to 383 stroker :: 350 bored out .40 and stroker kit)
1993 Chevy S10 - 4.3L Turbo (Syclone engine) with MTX Trans.
1988 Dodge Diplomat - 318ci with 3sp ATX trans.

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 7:11 pm

so what are you looking with/ and without motor delivered??
take it easy....... and if its easy, take it again!!

Red1996ACR
1GN Registrant
Posts: 47
Joined: Fri Jun 29, 2007 7:59 pm
Location: Waverly, NY, USA
Contact:

Post by Red1996ACR » Fri Jul 06, 2007 7:12 pm

What's your zip so I can get exact mileage?
1996 Plymouth Neon ACR - http://www.cardomain.com/ride/724058/
2001 Chevy Silverado - 363ci 380 rwhp. (Swapped out to 383 stroker :: 350 bored out .40 and stroker kit)
1993 Chevy S10 - 4.3L Turbo (Syclone engine) with MTX Trans.
1988 Dodge Diplomat - 318ci with 3sp ATX trans.

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 7:59 pm

49404
take it easy....... and if its easy, take it again!!

Red1996ACR
1GN Registrant
Posts: 47
Joined: Fri Jun 29, 2007 7:59 pm
Location: Waverly, NY, USA
Contact:

Post by Red1996ACR » Fri Jul 06, 2007 8:47 pm

About $500 without the SOHC motor. And $600-650 with the motor for motor purchasing price, gas (at .15/mile)
1996 Plymouth Neon ACR - http://www.cardomain.com/ride/724058/
2001 Chevy Silverado - 363ci 380 rwhp. (Swapped out to 383 stroker :: 350 bored out .40 and stroker kit)
1993 Chevy S10 - 4.3L Turbo (Syclone engine) with MTX Trans.
1988 Dodge Diplomat - 318ci with 3sp ATX trans.

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 8:58 pm

does it have a tranny or no??

also if you could just get a motor doesnt, have to be running and just

put it with the car, not installed, would that lower the price at all.

looking to stuff it with dohc pistons so its gunna come out anyway.
take it easy....... and if its easy, take it again!!

Red1996ACR
1GN Registrant
Posts: 47
Joined: Fri Jun 29, 2007 7:59 pm
Location: Waverly, NY, USA
Contact:

Post by Red1996ACR » Fri Jul 06, 2007 9:28 pm

Yeah. I'll find a low compression motor at a jy, and get the price knocked down. And yeah the tranny is staying with it.
1996 Plymouth Neon ACR - http://www.cardomain.com/ride/724058/
2001 Chevy Silverado - 363ci 380 rwhp. (Swapped out to 383 stroker :: 350 bored out .40 and stroker kit)
1993 Chevy S10 - 4.3L Turbo (Syclone engine) with MTX Trans.
1988 Dodge Diplomat - 318ci with 3sp ATX trans.

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 9:33 pm

nice, let me know when you come up with a motor and we can get a

final price and arrange everything.

also is it a 3.94 or 3.55
take it easy....... and if its easy, take it again!!

turboking11
1GN Registrant
Posts: 62
Joined: Wed May 02, 2007 3:16 am
Location: columbus ohio

Post by turboking11 » Fri Jul 06, 2007 9:34 pm

also if you need any parts let me know, i am currently parting out a

1996 4 door dohc auto.
take it easy....... and if its easy, take it again!!

Post Reply