Questions about Amps, headunits, speakers, subs, ect... Anything to do with audio, those questions all go here.
-
projectneon1998
- 1GN Registrant
- Posts: 201
- Joined: Mon Mar 15, 2010 4:02 pm
- Location: ohio
Post
by projectneon1998 » Mon Mar 15, 2010 4:22 pm
i have a pair of 5 and a 1/2 dual speakers with the blue l.e.ds i cant get them to fit cause the big magnet on the back of the speaker is to big and wont let the window go down can some body give me a idea to make it fit
-
dude man
- 1GN Registrant
- Posts: 114
- Joined: Thu Feb 18, 2010 10:32 am
- Location: dartmouth, nova scotia
Post
by dude man » Mon Mar 15, 2010 7:10 pm
or you can use the stock spacer frome the stock speakers thats what i used for my speakers
-"its stock body, its not in the RiCe section next to the beef and chicken mix"-
-
JmAnneonrt
- 1GN Registrant
- Posts: 433
- Joined: Sun Jan 03, 2010 11:45 pm
- Location: BANGOR,MAINE
Post
by JmAnneonrt » Mon Mar 15, 2010 7:23 pm
I have the same exact speakers but i didnt hook up the leds cause there a little stupid but they do sound good but anyways i had the same problem i put them in and the window wouldnt go down so i drilled holes in the stock spacer off the stock speakers worked great.
-
projectneon1998
- 1GN Registrant
- Posts: 201
- Joined: Mon Mar 15, 2010 4:02 pm
- Location: ohio
Post
by projectneon1998 » Mon Mar 15, 2010 8:31 pm
i drilled holes in the stock spacer but the magnet was still touching the window
-
dude man
- 1GN Registrant
- Posts: 114
- Joined: Thu Feb 18, 2010 10:32 am
- Location: dartmouth, nova scotia
Post
by dude man » Mon Mar 15, 2010 8:35 pm
well cut out some wooden spacers and mont the speaker to the outside of the door panel, and put the face of the speaker on them
-"its stock body, its not in the RiCe section next to the beef and chicken mix"-
-
metal_gear_jon
- 1GN Registrant
- Posts: 559
- Joined: Tue Feb 13, 2007 7:12 pm
- Location: Cincinnati, oh
Post
by metal_gear_jon » Mon Mar 15, 2010 9:38 pm
That would look awful, are you married to these speakers? Just get some other cheap ones. Why butcher your car up?
-
JmAnneonrt
- 1GN Registrant
- Posts: 433
- Joined: Sun Jan 03, 2010 11:45 pm
- Location: BANGOR,MAINE
Post
by JmAnneonrt » Mon Mar 15, 2010 11:04 pm
i had the problem to i did somthing but i cant member what arghh and i dont have my car here to help you sorry
EDIT: post a pic of the speaker with the stock spacer i might be able to member what i did.
-
DalesDad
- 1GN Registrant
- Posts: 44
- Joined: Wed Apr 15, 2009 3:11 pm
- Location: SE Pa
Post
by DalesDad » Fri Mar 19, 2010 5:19 pm
i made some spacers out of rubber mat material, i think i wound up using about a half inch worth to bring the speaker out far enough for my magnets to clear so the window can roll down...there is plenty of clearance between the back of the door panel and the front of the speaker.