head light issue

Have a question on outside appearance modifications. Questions about body kits, exterior lighting, just anything thats a visual mod on the "exterior" of the car. Ask those questions here.
Post Reply
whitecoupe97
1GN Registrant
Posts: 24
Joined: Sun Nov 27, 2011 6:26 pm
Location: richmond

head light issue

Post by whitecoupe97 » Thu Mar 01, 2012 12:34 pm

ok one of my headlights is really dem and the other is normal so i looked at the connecters and where the prongs go in is burnt up...sooooo i went to the junk yard and got 2 new connecters and took them home and hooked them up and still the same issue...its not the bulb cause when i turn to brights its the same way only the normal one gets brighter and the dem one stays the same...any advice???? :(
-Now im ridin neon-

User avatar
Ianguilly
1GN Registrant
Posts: 1321
Joined: Thu Oct 22, 2009 9:28 am
Location: Cincinnati, OH

Post by Ianguilly » Thu Mar 01, 2012 9:15 pm

Check your ground wires?
Image
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"

-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.

BaLLisTiK
1GN Registrant
Posts: 661
Joined: Tue Sep 21, 2010 10:31 pm
Location: New Port Richey, FL

Post by BaLLisTiK » Fri Mar 02, 2012 10:18 pm

Wow Mine was the same way...I wigggled the connector and it brightened back up. Weird.
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.

ricker91878
1GN Registrant
Posts: 236
Joined: Thu Apr 22, 2010 11:50 pm
Location: Eustis FL

Post by ricker91878 » Fri Mar 02, 2012 10:35 pm

Def a loose connection
99 2 dr R/T DOHC coupe, all the bells and whistles...

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Fri Mar 02, 2012 11:05 pm

If you want new connectors, they sell them at autozone. But it sounds like a loose connection.
Image
Image

BaLLisTiK
1GN Registrant
Posts: 661
Joined: Tue Sep 21, 2010 10:31 pm
Location: New Port Richey, FL

Post by BaLLisTiK » Sat Mar 03, 2012 6:46 pm

I'm assuming mine was just loose...
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.

Post Reply