Have a question on outside appearance modifications. Questions about body kits, exterior lighting, just anything thats a visual mod on the "exterior" of the car. Ask those questions here.
-
chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
Post
by chrono_killa » Fri Feb 16, 2007 3:14 pm
How do u make them or where can i buy them?
BIGRAM wrote:i ain't gay you sucked my dick
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udp
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
-
loserlee
- 1GN n00b
- Posts: 14
- Joined: Tue Feb 13, 2007 7:16 am
- Location: Austin, Minnesota
Post
by loserlee » Fri Feb 16, 2007 7:24 pm
Go to a sign shop, and ask for some scrap vinyl.. probably sell it to you cheap, or just give it to you.
I've seen people use electrical tape, on black cars, but that's just ghetto...
-
philter
- Temporary Moderator
- Posts: 227
- Joined: Sun Jan 28, 2007 12:22 am
- Location: central ohio
Post
by philter » Fri Feb 16, 2007 7:29 pm
loserlee wrote:Go to a sign shop, and ask for some scrap vinyl.. probably sell it to you cheap, or just give it to you.
exactly what i did, and it cost me $4 for a square foot piece which left me enough to do the eyelids a few times over.
AKA EVLNEON :: 03 SUBY WRX
-
black_magic
- 1GN Registrant
- Posts: 77
- Joined: Mon Feb 12, 2007 12:08 pm
- Location: Muskegon, MI
Post
by black_magic » Sat Feb 17, 2007 10:23 pm
eyelids dont work with DEPO's...or atleast i couldnt get them to work lol
-
Stags
- 1GN Registrant
- Posts: 154
- Joined: Fri Feb 16, 2007 12:22 am
- Location: Wisconsin
Post
by Stags » Sat Feb 17, 2007 10:32 pm
You couldn't stick it to them??
-
black_magic
- 1GN Registrant
- Posts: 77
- Joined: Mon Feb 12, 2007 12:08 pm
- Location: Muskegon, MI
Post
by black_magic » Sat Feb 17, 2007 10:37 pm
Stags wrote:You couldn't stick it to them??
no they stick but the lense on a DEPO is wierd...its hard to explain
-
Whodini
- 1GN Registrant
- Posts: 95
- Joined: Mon Feb 12, 2007 9:06 pm
- Location: *Roseville, Michigan*
-
Contact:
Post
by Whodini » Sat Feb 17, 2007 10:50 pm
paint them on, and them 3 little nibs that are on the light, you can dremmal them off, then polish them, then paint your eyelid. it will look great. ive donr it and turned out pretty impressive.
~96 Plymouth Neon 2 Door Coupe ~A Little Show & A Little Go~
-
black_magic
- 1GN Registrant
- Posts: 77
- Joined: Mon Feb 12, 2007 12:08 pm
- Location: Muskegon, MI
Post
by black_magic » Sat Feb 17, 2007 11:25 pm
Whodini wrote:paint them on, and them 3 little nibs that are on the light, you can dremmal them off, then polish them, then paint your eyelid. it will look great. ive donr it and turned out pretty impressive.
thinking about it but im not just going to go out and paint and dremmal my depos....now if i had OEM lights i would
-
Whodini
- 1GN Registrant
- Posts: 95
- Joined: Mon Feb 12, 2007 9:06 pm
- Location: *Roseville, Michigan*
-
Contact:
Post
by Whodini » Sat Feb 17, 2007 11:33 pm
i guess its easy for me cause ive done it a few times and it always came out good. i do recommend you have a little talent to do this. you have to know how to buffem out with the right polish. a steady hand to cut off the nibbs, and your golden.
~96 Plymouth Neon 2 Door Coupe ~A Little Show & A Little Go~
-
NeonDude2.0
- 1GN Registrant
- Posts: 28
- Joined: Thu Feb 15, 2007 12:11 am
- Location: Ontario
Post
by NeonDude2.0 » Fri Feb 23, 2007 1:14 pm
bahh, you're all wrong, do it right, get them moulded into the hood, only way it will look good on a 1st gen
------------------------------------Shawn------------------------------------
-
Diablo0
- 1GN.org Owner/Admin
- Posts: 777
- Joined: Thu Jan 25, 2007 4:39 am
- Location: Greenville, SC - Pelzer
-
Contact:
Post
by Diablo0 » Fri Feb 23, 2007 10:20 pm
If someone has a template for them I have a Vinyl cutter to make decals so I can make them for you if a shop there won't do it for you or doesn't know what you're talking about. Shouldn't be a problem with a template and some dimensions
-Jason
Black '02 Neon R/T |
White '02 Neon R/T -
SRT-4 Engine Swap
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein
-
black_magic
- 1GN Registrant
- Posts: 77
- Joined: Mon Feb 12, 2007 12:08 pm
- Location: Muskegon, MI
Post
by black_magic » Sat Feb 24, 2007 2:50 am
does anyone have them on thier DEPO's??? cause when i tried the vynal got all messed up and stuff
-
BlueR/T
- 1GN Registrant
- Posts: 625
- Joined: Mon Feb 12, 2007 7:38 pm
- Location: unknown
Post
by BlueR/T » Sat Feb 24, 2007 4:13 am
i think doing the extended hood look is better:
this is just a photoshop (suzq) but there are a few who have done it
it looks way more aggressive than stick-on eyelids
with depos you would lose alot of the high-beam output, but how much do you really need the high beams with depos?
-
RTryan
- 1GN n00b
- Posts: 8
- Joined: Wed Feb 14, 2007 9:49 pm
- Location: Cleveland Ohio
Post
by RTryan » Sat Feb 24, 2007 11:55 am
Probably the best pic i have of my eyelids, never really came around to take pics of em. But i had the full on headlight covers (like those rear like covers to make em look black ya know) and just did some 5th grade measuring, cut it with a wheel, sanded the edges cause since the wheel spins fast it melts it a little since its plastic, then threw some black spray paint on em. 3m 2x-tape on the back sides and pushed em on the headlights, been holding up great ever since (about mid last summer).
-
NeonDude2.0
- 1GN Registrant
- Posts: 28
- Joined: Thu Feb 15, 2007 12:11 am
- Location: Ontario
Post
by NeonDude2.0 » Sun Feb 25, 2007 9:56 pm
BlueR/T wrote:i think doing the extended hood look is better:
this is just a photoshop (suzq) but there are a few who have done it
it looks way more aggressive than stick-on eyelids
with depos you would lose alot of the high-beam output, but how much do you really need the high beams with depos?
ahh that's the picture i was thinking off. That is sex right there. I know a guy near me who has it done like that, only way to do it IMHO everything else doesn't flow
------------------------------------Shawn------------------------------------