Tie rod end help

Have some questions about how to achive better handling and stopping power? Questions about 1st gen Neon suspension, steering and braking systems belong right here!
Post Reply
User avatar
Ianguilly
1GN Registrant
Posts: 1321
Joined: Thu Oct 22, 2009 9:28 am
Location: Cincinnati, OH

Tie rod end help

Post by Ianguilly » Thu Aug 05, 2010 11:41 pm

Well guys been trying to get the tie rod end on my passenger side got the one by the rotor off but the second one is a bitch and can't seem to get it tips? Also is the second bolt a 22mm metric? cant get it off soon just gonna hacksaw it off.
Image
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"

-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.
Top
User avatar
metal_gear_jon
1GN Registrant
Posts: 559
Joined: Tue Feb 13, 2007 7:12 pm
Location: Cincinnati, oh

Post by metal_gear_jon » Fri Aug 06, 2010 7:18 am

Vice grips on the rod itself and use lots of wd-40. You should leave the end attached to the knuckle before trying to loosen the jam nut. Try using an adjustable wrench on the jam nut. Some hammering and cursing should so the trick.
'98 Alpine Green Coupe turbo fodder
Image
^ Not mine...

http://www.tristateneons.org/ never forget...

Have a lol

Feeding the trolls since '07
Top
Post Reply

Return to “Suspension / Brakes”