SAFC2 install
-
- 1GN Registrant
- Posts: 18
- Joined: Thu Apr 07, 2011 4:07 am
- Location: Alabama
SAFC2 install
Hi all. I have been searching desperately for the past week or two to find a wiring diagram for a 1995 SOHC neon to install a Apex'i SAFC 2 and haven't turned up anything as of yet. There was one I have found on this site, but it seems to have been taken down or just says edit... I apologize for any inconvenience or missing a post that pertains to my needs. Thanks for your help in advance.
1995 2dr Plymouth Neon SOHC MTX
Crane 14, nitrous oxide, race ported head, SAFC 2, few more extras.
Crane 14, nitrous oxide, race ported head, SAFC 2, few more extras.
forums.neons.org/viewtopic.php?f=18&t=332184
After you go to that link before you clic on the link in the first post read the second post by Nono, there is only one wire that is different between the safcI and safcII, he tells what to do with that wire, it is fo the knock sensor. The rest is the same as an safcI. That is the same post I used to install mine on my 95.
After you go to that link before you clic on the link in the first post read the second post by Nono, there is only one wire that is different between the safcI and safcII, he tells what to do with that wire, it is fo the knock sensor. The rest is the same as an safcI. That is the same post I used to install mine on my 95.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
-
- 1GN Registrant
- Posts: 18
- Joined: Thu Apr 07, 2011 4:07 am
- Location: Alabama