N/A 2.4 build
-
- 1GN Registrant
- Posts: 37
- Joined: Mon Aug 03, 2009 3:17 pm
- Location: FT Meade, MD
N/A 2.4 build
I was going to do a turbo build with this 2.4 but i am more leaning on just a good daily driver N/A build. What would be some good cams, header, and internals??? I have the complete montor from a 2000 stratus.
-
- 1GN Registrant
- Posts: 37
- Joined: Mon Aug 03, 2009 3:17 pm
- Location: FT Meade, MD
-
- 1GN Registrant
- Posts: 500
- Joined: Tue Nov 27, 2007 1:45 am
- Location: Cockeysville, Maryland
The head should be fine with 18's, but you'll need Crane valve springs, preferably Crower ones with anything over 18's. I'm running Crower 4G63 springs with my 16's because the guy that I bought the setup from had broken two Cranes with them.
Gasket matching the head and slightly opening up the intake manifold ports couldn't hurt though, and would really help, especially with the bigger engine and hotter cams.
Gasket matching the head and slightly opening up the intake manifold ports couldn't hurt though, and would really help, especially with the bigger engine and hotter cams.