I've posted this on a few other forums so I figured I'd throw it out here:
This was at 16 psi on a stock SRT4 turbo. Boost tapered to 13psi at redline (thus the drop in HP/TQ). Timing was conservative, AFR's in the mid 11's. Actually started the day at mid/high 12's for AFR and hit 329whp/325wtq but that was a bit too lean for me.
I'm currently blaming the drop in boost on the shitty stage 2 wastegate. Upon further inspection it looks that I have room to adjust it....it left it the same as when it was on my SRT4 and I completely forgot to try adjusting it. So I'm going to mess with it and see what happens....if it doesn't help I new one will be purchased soon and maybe another trip back to the dyno. I'd say I could get another 4psi out of it and hold 16-17psi to redline and pick up a nice amount of power. For now though I'm happy
A few videos:
http://thedarkroom.us/jason_pics/DSCN1523.AVI
http://thedarkroom.us/jason_pics/DSCN1532.AVI
Photos:
http://dunawayphotography.com/jasongall ... itemId=817
The setup:
* worked SRT4 head with 2.0L cams (3 angle valve job, p&p)
* stock SRT4 turbofold with the o2 housing area opened up a bit
* SRT4 stage 2 wastegate (may go with agp version soon)
* 3" exhaust, starting at the o2 housing
* built 2.0L block with crowers/wiseco pistons
* new water pump, oil pump, timing belt (w/ mechanical tensior)
* precision 400whp intercooler
* SRT4 clutch
* SRT4 intake manifold
* 60mm jeep TB
* SRT4 stage 1 injectors
* 1:1 regulator, -6AN to and from tank, custom -6 rail
* walbro pump with custom feed mod (AN style)
* megasquirt v2.2, keeping stock ECU but controling fuel/timing with MS
* obx lsd
* lc-1 wideband
UPDATE:
I took the wastegate off and adjusted it. Boost is spooling much quicker now. Seems that it was not closed long enough before. I was able to hit 18-20psi but it still was dropping off up top. I'll have to tweak it more to get the tune that I want.
318whp/313wtq SRT4 turbo'd 2.0L
318whp/313wtq SRT4 turbo'd 2.0L
dunny
'03 SRT4 12.774@106.09 - sold
'96 DOHC SC 11.948@116.98mph
SRT-4 turbo powered
'03 Solar Yellow sXt - 17.199@78.48 1/4
'04 SXT Dakota CC 4x4
'88 "Mopar Express" Dakota - sold
'03 SRT4 12.774@106.09 - sold
'96 DOHC SC 11.948@116.98mph
SRT-4 turbo powered
'03 Solar Yellow sXt - 17.199@78.48 1/4
'04 SXT Dakota CC 4x4
'88 "Mopar Express" Dakota - sold
Old thread I know lol
But what was the weight of the car when you ran that 11.9?
my last neon was around 2280 last i weighed it, but I removed alot since
the current neon I'd like to get at 2000-2100 and keep as many interior panels as i can
I have a similar setup i need to assemble.
main differences are I'm using a 2.4 with SRT4 internals,using a 1st gen ported head with OS valves and it had crane #16s
Not sure how ideal the #16s are but i have a set of 2.0s as well
I think once i get a good on the MS i can see similar numbers
But what was the weight of the car when you ran that 11.9?
my last neon was around 2280 last i weighed it, but I removed alot since
the current neon I'd like to get at 2000-2100 and keep as many interior panels as i can
I have a similar setup i need to assemble.
main differences are I'm using a 2.4 with SRT4 internals,using a 1st gen ported head with OS valves and it had crane #16s
Not sure how ideal the #16s are but i have a set of 2.0s as well
I think once i get a good on the MS i can see similar numbers
- neon_freak
- 1GN Registrant
- Posts: 521
- Joined: Wed Feb 14, 2007 5:57 am
- Location: Fond Du Lac, WI
the million dollar qestion is how did you get an srt-4 head to work on a 2.0? after 02, they are a differnt design
95 strawberry coupe mtx sohc
pacesetter header/catback, sts, boogers, 3.0, atx tb, ported intake, mp ecu, solid bobble strut, magnecor wires
98 white rt coupe mtx 2.4
mopar ecu, egr kit. ur street pulley, mpx 60mm, iceman, msd wires/coil, solid mounts, ractive header, vibrant muffler
old 2.0-145.4hp@6161rpm, 134.5tq@5218rpm
pacesetter header/catback, sts, boogers, 3.0, atx tb, ported intake, mp ecu, solid bobble strut, magnecor wires
98 white rt coupe mtx 2.4
mopar ecu, egr kit. ur street pulley, mpx 60mm, iceman, msd wires/coil, solid mounts, ractive header, vibrant muffler
old 2.0-145.4hp@6161rpm, 134.5tq@5218rpm
- Trev_Masta
- 1GN Registrant
- Posts: 147
- Joined: Wed May 16, 2007 9:57 am
- Location: Texas