does anyone know when i t3 starts spooling. idk if this is kind of an open question. and if mods affect this. its a stock motor with 2.5 exhaust.
not ball bearing
t3
Did you ever find out any info on this.
What size is the exhaust A/R you are looking at?
My sc61 on my old single came with a 01'magnum cam (everything else basically stock) was spooled to 14 psi before 4,000 rpm. It is a 60 t3/t4 with a e cover and a .63 A.R. Hot side.
What size is the exhaust A/R you are looking at?
My sc61 on my old single came with a 01'magnum cam (everything else basically stock) was spooled to 14 psi before 4,000 rpm. It is a 60 t3/t4 with a e cover and a .63 A.R. Hot side.
Jordan
sweetcorn_w00t wrote:
Now you can tell me that I've failed at life, I'm gay, and that my dad should have pulled when he pushed; since you won't be able to think of anything else.
-
- 1GN Registrant
- Posts: 145
- Joined: Tue Nov 13, 2007 8:46 pm
-
- 1GN n00b
- Posts: 7
- Joined: Sat Oct 18, 2008 11:00 pm
- Location: ohio
My sc61 on my old single came with a 01'magnum cam (everything else basically stock) was spooled to 14 psi before 4,000 rpm. It is a 60 t3/t4 with a e cover and a .63 A.R. Hot side.[/quote]
i think my turbo is the same size. really starts pulling and making noise around 3-4k rpm.
i think my turbo is the same size. really starts pulling and making noise around 3-4k rpm.
96 2dr neon turbo intercooled nitrous injected mtx= broken parts