egr issues

This is the place to ask questions about your engine components like cams, valves, pistons? just anything that is generally "engine" specific.
Post Reply
User avatar
1genRTturbo
1GN Registrant
Posts: 468
Joined: Sun Feb 28, 2010 5:20 pm
Location: Tooele, ut

egr issues

Post by 1genRTturbo » Fri Dec 16, 2011 8:30 pm

so, i have a check engine light for egr flow performance. is this a common issue with a swapped 2.4? it has a 2.0 intake and egr system and exhaust manni, and its all hooked up. is there maybe an issue and my egr went bad or does it pose issues from being swapped?
It's not the fall that hurts, it's the sudden stop at the bottom!

chipdogg
1GN Registrant
Posts: 2180
Joined: Wed Mar 14, 2007 12:30 pm
Location: Muscoda, wi

Post by chipdogg » Fri Dec 16, 2011 9:36 pm

Check the steel tube and clean it out, as well as the egr port on intake manifold.

Hooked up right?
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51

52 and counting, when will it stop?

User avatar
1genRTturbo
1GN Registrant
Posts: 468
Joined: Sun Feb 28, 2010 5:20 pm
Location: Tooele, ut

Post by 1genRTturbo » Sat Dec 17, 2011 9:26 pm

yeah its all hooked up correctly. i'll try the port in the head.
It's not the fall that hurts, it's the sudden stop at the bottom!

Post Reply