Cylinder Head sohc Egr Questions....

This is the place to ask questions about your engine components like cams, valves, pistons? just anything that is generally "engine" specific.
Post Reply
Rags
1GN Registrant
Posts: 55
Joined: Sat May 29, 2010 1:47 am
Location: Arizona

Cylinder Head sohc Egr Questions....

Post by Rags » Sun May 30, 2010 6:38 pm

In a pinch years ago after my son piched the t-belt and bent all the valves on my 1995 2.0 SOHC,I put on a Non-EGR head that had less then 500 miles on it(perks from working at a Dodge dealer)...Well I need to put the EGR system back on the motor so I can sell it,keep as back up etc in my emmsions test area I moved to...question is can I drill an EGR port in the head that is non egr? I do not have an old EGR head I can look at to get an idea in what direction or angle the port is drilled into the exhaust port....Not a pressing issue right now, but gaining a little info if I can...thanks:)
1995 Plymouth Strawberry 4 door was SOHC ATX with now a full 98 R/T DOHC MTX everything swap front to back ....300,000 miles on 95 before being reborn as a 98 R/T with 68,000 miles.

http://www2.cardomain.com/ride/779073

Post Reply