Motor Stratus R/T 1GN

This is the place to ask questions about your engine components like cams, valves, pistons? just anything that is generally "engine" specific.
Post Reply
SHOY
1GN Registrant
Posts: 25
Joined: Tue Feb 13, 2007 11:43 am

Motor Stratus R/T 1GN

Post by SHOY » Mon Aug 13, 2007 2:36 pm

Hello friends ! ! !

im back with a one question.


a friend have a 2.4L Turbo Motor from Stratus R/T 99, and sell me all motor parts in 600 dollars, but who i need to put in my neon 1995 SOHC????

i hope your answers ! ! ! !
Image

APN
1GN Registrant
Posts: 1536
Joined: Mon Feb 12, 2007 6:10 pm

Post by APN » Mon Aug 13, 2007 2:39 pm

So just to clarify... You are asking what parts and modification you need to put this stratus motor into your neon?
#64
Image
APN wrote:
Jordan2.4 wrote:Apn...please make a new sig with pictures of your car CLEAN...i am tired of looking at the dirt...
That's called chipping paint son. Get some glasses. 8)

chipdogg
1GN Registrant
Posts: 2180
Joined: Wed Mar 14, 2007 12:30 pm
Location: Muscoda, wi

Post by chipdogg » Mon Aug 13, 2007 4:23 pm

You'll need a DOHC wiring harness and PCM, along with the side motor mount to get it in and running. You'll need a bunch more parts for the turbo of course, but you should do research to figure that out, otherwise I bet you'll break something.
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51

52 and counting, when will it stop?

SHOY
1GN Registrant
Posts: 25
Joined: Tue Feb 13, 2007 11:43 am

Post by SHOY » Wed Aug 15, 2007 3:53 pm

thanks for your answer chipdog, anyone have fotos of this motor mounts on a 1g? you tell me a bunch of parts, i have all motor wiring arnes, intake exhaust, sensor, all the fucking motor, ! !! and a intercooler of SRT-4
Image

sohcneon13x
1GN Registrant
Posts: 469
Joined: Mon Feb 12, 2007 4:47 pm
Location: SoMinneIoDawasotakota

Post by sohcneon13x » Wed Aug 15, 2007 4:02 pm

What motor are you talking about? Dodge never offered the 1st gen Stratus as a R/T.
96 Plymouth Neon Sedan
SOHC/MTX(swapped!)
MOPAR Street Header/3.0 CAI/ATX TB/UDP/95 cam/ ........40+MPG HWY!

96 Plymouth Neon Expresso Coupe
SOHC/MTX
MOPAR ECU/ ATX TB/ 3.0 CAI/ MOPAR X-High Rates & KYB struts

97 Plymouth Neon sedan
DOHC/ATX ...soon to be MTX!
RECENTLY VANDALIZED AND TOTALED OUT!
rebuild?
MEMBER #52

User avatar
Cbussilver01es
1GN Registrant
Posts: 70
Joined: Tue Aug 14, 2007 1:52 pm
Location: Columbus, OH
Contact:

Post by Cbussilver01es » Wed Aug 15, 2007 8:56 pm

sohcneon13x wrote:What motor are you talking about? Dodge never offered the 1st gen Stratus as a R/T.
I know you said 99 but I dont think the R/T came in that year or with a turbo. You'll need the motor obviously, lol engine harness,engine bay harness, pcm, exhaust manifold/turbo(if equipped), T-850 tranny if the motor doesnt come with it, I dont think the 3.94 will work though I am not sure...um you might have to upgrade your axles too but Im not sure. If its N/A then stock axles should be good if its turbo, then you'll need to upgrade your axles.
-Sean
Image
Ohio Neons
Lh95sohc on Tristate....
Cbussilver01es on 2gn....

neonguru
1GN Registrant
Posts: 32
Joined: Sat Aug 04, 2007 3:28 pm

Post by neonguru » Thu Aug 16, 2007 11:26 pm

did they make a 99 r/t stratus? or even a tubo stratus at all?

GingerKidzFTW
1GN Registrant
Posts: 205
Joined: Tue Feb 13, 2007 11:21 am
Location: Altoona, PA

Post by GingerKidzFTW » Fri Aug 17, 2007 9:48 am

neonguru wrote:did they make a 99 r/t stratus? or even a turbo stratus at all?
I don't believe so.
'95 N/A SOHC Budget Drag Car in the works!

Shooting for some low 13's/high 12's by the end of summer.

Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.

sohcneon13x
1GN Registrant
Posts: 469
Joined: Mon Feb 12, 2007 4:47 pm
Location: SoMinneIoDawasotakota

Post by sohcneon13x » Fri Aug 17, 2007 10:27 am

They did in Mexico. Don't know for sur if it was a R/T, but you coulg get it turbo.
96 Plymouth Neon Sedan
SOHC/MTX(swapped!)
MOPAR Street Header/3.0 CAI/ATX TB/UDP/95 cam/ ........40+MPG HWY!

96 Plymouth Neon Expresso Coupe
SOHC/MTX
MOPAR ECU/ ATX TB/ 3.0 CAI/ MOPAR X-High Rates & KYB struts

97 Plymouth Neon sedan
DOHC/ATX ...soon to be MTX!
RECENTLY VANDALIZED AND TOTALED OUT!
rebuild?
MEMBER #52

chipdogg
1GN Registrant
Posts: 2180
Joined: Wed Mar 14, 2007 12:30 pm
Location: Muscoda, wi

Post by chipdogg » Fri Aug 17, 2007 1:44 pm

Mexican Stratuses came turbo, that's what all the old-timers used for turbo 2.4 parts. That's what was in my ACR before Dave gutted it.
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51

52 and counting, when will it stop?

neonguru
1GN Registrant
Posts: 32
Joined: Sat Aug 04, 2007 3:28 pm

Post by neonguru » Fri Aug 17, 2007 2:57 pm

thanks for the info guys. I didn't know about those. Learn something new everyday!

Post Reply