hi at all,
I have a question, have a 1gen 99th
have a 2.0 sohc, I want to install a 2.4 turbo or 2.4 non turbo,
can buy a engine that comes from the Chrysler PT Cruiser 2.4 turbo, what else do I need for the swap?
there somewhere a description for the swap?
which parts do I need to buy?
2.4 swap , which engine will fit
2.4 out of a pt cruiser or a stratus
if you are running a motor newer than 03 it will require either a full harness including dash swap or megasquirt.
b/c the turbo motors are 03 you would need MS or like i said full swap harness, cluster, keys and such to make it work
If you go with a motor older than 02 then you can use just a dohc computer and harness and change out the pins for the coil. The transmissions from our cars will just bolt up to the block.
For a swap you will also need a 2.4 motor mount adapter, and depending on a motor will need the pt alternator brackets.
For fuel you will need to have 24lb injectors which can be found in mustang gt i beleive(blue top injectors)
-you will also need to have a 58psi fuel regulator since the 1gns to 01 are only 42psi(???)
the passenger side mount may hve to be flipped for the motor to fit. I think the dohc intake manifold will fit but on the 03 and new headers will have to be redrilled
if you are running a motor newer than 03 it will require either a full harness including dash swap or megasquirt.
b/c the turbo motors are 03 you would need MS or like i said full swap harness, cluster, keys and such to make it work
If you go with a motor older than 02 then you can use just a dohc computer and harness and change out the pins for the coil. The transmissions from our cars will just bolt up to the block.
For a swap you will also need a 2.4 motor mount adapter, and depending on a motor will need the pt alternator brackets.
For fuel you will need to have 24lb injectors which can be found in mustang gt i beleive(blue top injectors)
-you will also need to have a 58psi fuel regulator since the 1gns to 01 are only 42psi(???)
the passenger side mount may hve to be flipped for the motor to fit. I think the dohc intake manifold will fit but on the 03 and new headers will have to be redrilled