Working on a DOHC or 2.4L swap, or maybe you have some other idea and have some questions? Feel free to ask them here...
-
carboneon
- 1GN Registrant
- Posts: 123
- Joined: Wed Nov 04, 2009 9:59 am
- Location: pennsylvania
Post
by carboneon » Tue Feb 23, 2010 10:20 pm
heres my ?s
1.if i use a mopar srt4 pcm and engine harness could i use the dash and body harness from a normal 03 to 05 neon?
2. is there a way around the skim key?
3. if dodge only wants a vin and mileage for info does a mopar stage 1 pcm look for a skim code if its bought as an accesory part rather than came with it from factory?
i havent found a smashed srt4 yet but found an 03 non skim automatic car in a local yard thats y im asking
1995 sedan (2.5 daytona swap)
1995 sedan (2.4 srt swap)
-
MrAngry
- 1GN Registrant
- Posts: 44
- Joined: Mon Feb 08, 2010 9:44 am
- Location: Grand Forks, ND
Post
by MrAngry » Wed Feb 24, 2010 4:38 pm
1 You should be able to use the regular neon harness but I am not 100% positive on that.
2 NO! Unless you tape the key to the module.
3 The PCM goes by the vin and should not need the skim code for anything.
98 Neon Coupe - 2.4 DOHC MTX
2004 Neon SXT - ATX - My fun car!!
-
hybrid-srt2001
- 1GN Registrant
- Posts: 34
- Joined: Sat Jun 30, 2007 12:09 am
Post
by hybrid-srt2001 » Thu Feb 25, 2010 10:18 pm
you can either buy the key for the srt skim module, or buy a brand new computer. once a pcm has seen a skim module it must always be hooked up to one.
-
carboneon
- 1GN Registrant
- Posts: 123
- Joined: Wed Nov 04, 2009 9:59 am
- Location: pennsylvania
Post
by carboneon » Thu Feb 25, 2010 10:21 pm
So if I buy a stage 1 kit that's brand new and it don't sense the skim day 1 it won't need 1
1995 sedan (2.5 daytona swap)
1995 sedan (2.4 srt swap)
-
MrAngry
- 1GN Registrant
- Posts: 44
- Joined: Mon Feb 08, 2010 9:44 am
- Location: Grand Forks, ND
Post
by MrAngry » Fri Feb 26, 2010 3:23 pm
True.
98 Neon Coupe - 2.4 DOHC MTX
2004 Neon SXT - ATX - My fun car!!