Wire harness / Dash

Tracing a wiring issue, or maybe have questions regarding an aftermarket security system? Post any non-audio related electrical questions here.
Post Reply
maul
1GN n00b
Posts: 2
Joined: Mon Oct 24, 2011 12:11 pm
Location: Ohio

Wire harness / Dash

Post by maul » Mon Oct 24, 2011 12:15 pm

I need a picture of the two wiring harnesses that plug into the dash/speedometer in a 1995 neon .Pulled several wires loose , and can't find a picture of the plugs to put them back in the right position.Thanks in advance.

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Mon Oct 24, 2011 8:09 pm

Which wires did you pull out? I don't feel like yanking mine out but I have an FSM with pin diagram I could tell you where they go.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

maul
1GN n00b
Posts: 2
Joined: Mon Oct 24, 2011 12:11 pm
Location: Ohio

Post by maul » Wed Oct 26, 2011 9:56 am

Can you just scan the picture or diagram I really need a picture all , out I need to replace the plug.I want to just conect the wires directly to the instrument cluster.10 wires on each plug.

Post Reply