Cookout on the Southside of Indianapolis August 6th

Orgainizing a Neon meet for your area and would like to draw some more people to it from the surrounding areas. Know of a automotive event such as a car show, scca event, or track gathering.. Post it here, it doesn't matter what part of the country.
User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Sat Jul 02, 2011 12:10 pm

custom95neon wrote:yah i plan on going
that park was really hard to find i asked people at the gas sation and they never heard of it and google maps did not give good drictions you should post dictritons for every one and also say the park is in a houseing addition
Yeah lol. We had this discussion on 2gn the other day. I almost gave up looking for it myself, never thought it would share an entrance with a subdivision. I really like how it was setup though, shelter close to the parking lot and lots of shade. I still have a couple parks to look at but none of the others have a parking close to the shelter it's kind of stupid really. Northwest park has a little horse shoe that goes to the shelter there but it has no parking signs all around it. I may ask them if we can bend the rules and park on that because it would be perfect. And there is a dirt track in the woods I could take my R/C cars to after everyone leaves :P If we do University park again I will put up an Indy Neon Meet sign or something. It is getting close I need to get on the ball.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
Ianguilly
1GN Registrant
Posts: 1321
Joined: Thu Oct 22, 2009 9:28 am
Location: Cincinnati, OH

Post by Ianguilly » Sat Jul 02, 2011 12:14 pm

Car is ready.
Image
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"

-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.

User avatar
custom95neon
1GN Registrant
Posts: 285
Joined: Sun Apr 18, 2010 9:13 pm
Location: Richmond IN

Post by custom95neon » Sun Jul 03, 2011 1:14 pm

i think signs would be a big help
that park seemed small if i rember right do you think it will be big enough for all of us? how many cars can fit there? lol i was only there for a couple of mins so i dont know if i rember right or not
95 plymouth sohc mtx sport sedan

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Sun Jul 03, 2011 1:23 pm

I think it will be, I would like to be optimistic about the turnout but its close enough people should know whether or not they will be coming and they aren't saying speaking up yet. I am going to look at a different park today. My girlfriend said the shelter there has its own parking lot.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Tue Jul 05, 2011 8:39 pm

Sorry I didn't get to look at parks this weekend. The lack of interest is killing all my motivation. Only 3 people coming for sure. I may just take a gamble and hope there is an open shelter at the park. Come on people!! This is barely going to be worth getting out of bed for.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
custom95neon
1GN Registrant
Posts: 285
Joined: Sun Apr 18, 2010 9:13 pm
Location: Richmond IN

Post by custom95neon » Wed Jul 06, 2011 12:18 pm

who r the people for sure?
95 plymouth sohc mtx sport sedan

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Wed Jul 06, 2011 5:57 pm

custom95neon wrote:who r the people for sure?
Me you and Gramps. Ian asked for the day off but said he wasn't sure if he was getting it off. Newlitemotorist says he is coming but that could change anytime. August is 99indiana's busy month at work so he is unsure if he will even be able to come. DOHC5sp2dr says he is going to do everything he can to attend but can't say for sure. More than likely Ian and newlitemotorist are coming so it makes 5 I guess. I pm'ed others on the list but haven't heard anything yet.

Newlitemotorist just told me he is coming. Drifterz73 said he has the rest of the parts for his tranny swap on the way so he should be there as well. Maybe 7.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
custom95neon
1GN Registrant
Posts: 285
Joined: Sun Apr 18, 2010 9:13 pm
Location: Richmond IN

Post by custom95neon » Wed Jul 06, 2011 6:14 pm

thats not 2 bad if they all show
what time is this going to be
95 plymouth sohc mtx sport sedan

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Wed Jul 06, 2011 6:21 pm

I just heard from 1stgentwofour, he said he is for sure coming unless something crazy comes up.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
Ianguilly
1GN Registrant
Posts: 1321
Joined: Thu Oct 22, 2009 9:28 am
Location: Cincinnati, OH

Post by Ianguilly » Wed Jul 06, 2011 6:38 pm

I put in for it a long time ago, so i'm 95% sure i'm off. even if i'm not i usually work late night so i could pull another Dayton move and rush my ass back to Cincy.
Image
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"

-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Wed Jul 06, 2011 6:53 pm

What time do we want to have this? Noon? 2pm?
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Thu Jul 07, 2011 2:50 am

Added Jimbo in MI to the maybe list.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
custom95neon
1GN Registrant
Posts: 285
Joined: Sun Apr 18, 2010 9:13 pm
Location: Richmond IN

Post by custom95neon » Fri Jul 08, 2011 12:34 pm

2 because i work in the morring on saterdays
95 plymouth sohc mtx sport sedan

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Fri Jul 08, 2011 7:42 pm

That works the best probably. We will shoot to start cooking around 2pm since we possibly have 3 people driving 3 or more hours. I will be there before then if people want to show up early. If the people that are making long drives or anyone coming for that matter want to pm me for my phone number that would be fine. In case you are running late for any reason we can hold off on the cooking.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Mon Jul 18, 2011 6:42 pm

Almost here. Anyone still coming? PM if so.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

Post Reply