1GN.ORG

sohcneon13x · Posted: Fri Aug 10, 2007 8:27 am Post subject:

I drool when I think about running an ITB setup!
_________________
96 Plymouth Neon Sedan
SOHC/MTX(swapped!)
MOPAR Street Header/3.0 CAI/ATX TB/UDP/95 cam/ ........40+MPG HWY!

96 Plymouth Neon Expresso Coupe
SOHC/MTX
MOPAR ECU/ ATX TB/ 3.0 CAI/ MOPAR X-High Rates & KYB struts

97 Plymouth Neon sedan
DOHC/ATX ...soon to be MTX!
RECENTLY VANDALIZED AND TOTALED OUT!
rebuild?
MEMBER #52

infil · Posted: Sat Aug 11, 2007 11:56 am Post subject:

you can run that on a turbo setup.....look at every rb series nissan engine. Just need to set up a sealed plenum.
_________________
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

chipdogg · Posted: Sun Aug 12, 2007 7:44 pm Post subject:

I don't see the point of running them on a turbo. Main reason to run them N/A is to have no plenum to get in your way. With a turbo, you just want the boost to get to the ports easily, a big TB would be better than ITB's in a turbo system.
_________________
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 2.4L, 14.665 @ 93.83 mph
'95 sedan- #21 - 01 Magnum
'96 black ACR coupe- #22
'95 green coupe-#27 - GF's DD
'95 NYG sedan- #29 - should scrap it
'95 strawberry sedan- #30 - FOR SALE
'98 black ACR coupe- #31

31 and counting...

AMM · Posted: Sun Aug 12, 2007 8:40 pm Post subject:

chipdogg · Posted: Mon Aug 13, 2007 8:35 am Post subject:

I guess if you wanted to do it to have a "cool" setup then go for it, but it wouldn't show much for gains. Hell it would probably create turbulence in the runners.

And the complicated part, don't forget about that. Laughing

_________________
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 2.4L, 14.665 @ 93.83 mph
'95 sedan- #21 - 01 Magnum
'96 black ACR coupe- #22
'95 green coupe-#27 - GF's DD
'95 NYG sedan- #29 - should scrap it
'95 strawberry sedan- #30 - FOR SALE
'98 black ACR coupe- #31

31 and counting...

Acid_ · 1GN n00b Age: 36 Joined: 25 Aug 2007 Posts: 11

any news lately mike?
im sure im not the only one waiting to see how it all turns out

AMM · Posted: Fri Sep 28, 2007 11:11 am Post subject:

well i have plans to take it back to the track in a few weeks here with the following car and mods that help me to go a bit faster.........

1995 sohc base coupe (2810 lbs. with me in it)
prothane motor mount inserts
solid bobble
no a/c or p/s
fresh stock rebuild (no more blow by like the last track times had)
very mildly ported head
crane 14 cam
mopar computer
itb's

last time i did a 16.0 at 86 with.......

mopar computer
solid bobble

im hoping to get at least a 14.9 this time.

mike
_________________

Need a ported/ custom intake manifold or system, oil catch can, or ported head? (look here...... http://forums.neons.org/viewtopic.php?t=259775) shoot me a PM for details. Headers and turbo manifolds to come shortly.

sohcneon13x · Posted: Fri Sep 28, 2007 12:50 pm Post subject:

Mike, are you having trouble hooking up or something? Definately not trying to bash you or anything, but 2 years ago I was running 15.5-15.7 With a SOHC with just and UDP, 3.0 CAI, and a Borla muffler on street tires. I just hate to see you get crap for not running better times.
_________________
96 Plymouth Neon Sedan
SOHC/MTX(swapped!)
MOPAR Street Header/3.0 CAI/ATX TB/UDP/95 cam/ ........40+MPG HWY!

96 Plymouth Neon Expresso Coupe
SOHC/MTX
MOPAR ECU/ ATX TB/ 3.0 CAI/ MOPAR X-High Rates & KYB struts

97 Plymouth Neon sedan
DOHC/ATX ...soon to be MTX!
RECENTLY VANDALIZED AND TOTALED OUT!
rebuild?
MEMBER #52

AMM · Posted: Fri Sep 28, 2007 2:51 pm Post subject:

BlueR/T · Posted: Fri Sep 28, 2007 3:54 pm Post subject:

so when can i order one for a DOHC

infil · Posted: Sat Sep 29, 2007 9:49 am Post subject:

get some 185-215 section 14" tires on it, honeslty i think the biggest problem your going to have is mid range. the ITB's as you know are geared for top end, the 3.55 will probably let you use those a little more, however its gonna be a bit to get up into the powerband on em and thats going to murder your times.

I'd drop down to 49mm tb's, 19lb injectors and MS so you can actualy tune the fuel instead of just playing with volume.
Your having the same problem I do with my intake, just more extreme, i have a sick throttle response but zero actual power under 4k, once I hit 4k the thing takes off likea bullet but getting it to stay hooked up crossing 4k is challenging in itself. The dr's start shakin pretty good through 2nd and into 3rd pretty hard.

where does the power start to come on? Try launching maybe 400rpm under that so your actually moving once the power hits pretty good. On a 14 with a ton of air coming in, i'd imagine your probably hitting int he same general area so probably try launching around 3700 or so, dont nescessarily sidestep the clutch but maybe load the driveline a bit and just hold it with the ebrake.

Experiement with it, the last car i played around with with itb's was a b18, so doesn't really apply.
_________________
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

AllMotorWes · Posted: Sat Nov 17, 2007 12:35 pm Post subject:

that video is f**king amazing!!! I love the sound
_________________
project: 1998 ALLMOTR Coupe

AMM · Posted: Thu Nov 22, 2007 12:08 pm Post subject:

wow i havent replied to this in a while.

im not messing with the DD anymore but i have now aquired my other race car back so now i have 3 neons total and i know what im going to do with the 2 race cars finally........... the name of the project is "evil twins" Twisted Evil

AMM
_________________

Need a ported/ custom intake manifold or system, oil catch can, or ported head? (look here...... http://forums.neons.org/viewtopic.php?t=259775) shoot me a PM for details. Headers and turbo manifolds to come shortly.

pettersen · Posted: Tue Apr 28, 2009 9:19 am Post subject:

do you have a how to/ projectlog showing how you made them?

Is that stock neon TB's you used? looks like it would be easier than modifying GSXR 750 ITB's
_________________
http://shibby.110mb.com/

AMM · Posted: Thu Apr 30, 2009 7:05 pm Post subject: