Cookout on the Southside of Indianapolis August 6th
- metal_gear_jon
- 1GN Registrant
- Posts: 559
- Joined: Tue Feb 13, 2007 7:12 pm
- Location: Cincinnati, oh
I will have a set of export tails for sale at the cookout, unless a local sees this and comes knocking on my door. Only problem is one doesn't have an export harness but I may possibly have the custom harnesses I made for mine before I got the right harnesses. It's easy to do, just takes some time on each pigtail with a dremel tool. If I don't have them I will make one for the tail without one.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
- custom95neon
- 1GN Registrant
- Posts: 285
- Joined: Sun Apr 18, 2010 9:13 pm
- Location: Richmond IN
I am expecting less than 10. Getting enough food to feed at least 20. I went to check on shelters today and forgot proof of residency and all that crap so I have to go back today. Important thing is its going to happen no matter what and turnout is going to be better than the last 2 years combined.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
lI'll know for sure by Saturday if i'm gonna be off.
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"
-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.
- custom95neon
- 1GN Registrant
- Posts: 285
- Joined: Sun Apr 18, 2010 9:13 pm
- Location: Richmond IN
I'm for sure going!!!!!
i got a headliner i'll give ya for $20
i got a headliner i'll give ya for $20
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"
-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.
Change of plans. Cookout is going to be at Old City Park in Greenwood. 304 S. Meridian Street, Greenwood 46143. Right across from Mrs. Curls Ice cream shop if anyone knows the area.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
Shelter
Parking lot. Sits a little downhill from the shelter, this should make for a good group picture.
There is also about 10 spaces in front of the shelter on the side of the street. There is actually about 20 but half of them have no parking signs in front of them and pavement is painted yellow. Kinda dumb
Parking lot. Sits a little downhill from the shelter, this should make for a good group picture.
There is also about 10 spaces in front of the shelter on the side of the street. There is actually about 20 but half of them have no parking signs in front of them and pavement is painted yellow. Kinda dumb
Last edited by jamieely on Wed Aug 03, 2011 6:40 pm, edited 1 time in total.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
- custom95neon
- 1GN Registrant
- Posts: 285
- Joined: Sun Apr 18, 2010 9:13 pm
- Location: Richmond IN
Sounds like 7 people confirmed they are coming. Hoping for some last minute attendees.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
looks like a great parking lot for doughnuts.
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"
-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.
You cant see from the picture but there is evidence of doughnuts there. No doughnuts saturday, please. I spent enough money on the cookout as is, I dont want to have to pay for parking lot repair. The park maintenance dept is right across the road from the lot and I am going to point out the condition of the gravel to them when I get there. When I told the lady we were having somewhat of a car club meet she immediately thought it was going to be a bunch of street racers and starting explaining how much they charge for damages and what not. I also had to sign a bunch of crap i dont remember signing last year. They charge $100 minimum for any trash left behind so I would hate to see the cost of parking lot repair. On a side note I think I will have someone there to take the group photo.Ianguilly wrote:looks like a great parking lot for doughnuts.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series
P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on
We'll be good Jamie, and make sure it looks just as nice as when we found it
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"
-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.