Post your how-to requests here

Want to explain How-To do something to make life easier for the next person? Post your detailed instructions here that explain the process you went through to fix, install, or whatever you want. This IS NOT the place to ask how to do something, please ask those questions in one of the other topic specific boards.
SPARKZ
1GN Registrant
Posts: 184
Joined: Sun Sep 16, 2007 12:23 am
Location: San Antonio TX
Contact:

Post by SPARKZ » Wed Apr 09, 2008 5:21 am

Lackof wrote:^Holly hell that's a lot to ask.

I will be getting up a how to here shortly on installing rocker and lifters on the DOHC neon without removing the camshafts, for those interested.
Actually skill already posted up that. but still a good one tho a for effort :D
Image

User avatar
robert 'bob' paulson
1GN Registrant
Posts: 829
Joined: Sun Jan 28, 2007 7:18 pm
Location: Elmira Heights, NY

Post by robert 'bob' paulson » Wed Apr 09, 2008 12:29 pm

SPARKZ wrote:
Lackof wrote:^Holly hell that's a lot to ask.

I will be getting up a how to here shortly on installing rocker and lifters on the DOHC neon without removing the camshafts, for those interested.
Actually skill already posted up that. but still a good one tho a for effort :D
Lackof = Skill and he has since edited all information out of his how-to's

User avatar
78jdg87
1GN n00b
Posts: 13
Joined: Sun Mar 29, 2009 3:05 pm
Location: Sedona, AZ

Post by 78jdg87 » Mon Mar 30, 2009 3:46 am

Requesting info to fix doors... the window goes too high to close properly.
1998 Dodge Neon 2dr. DOHC
Wide body flares, AIR Projector Headlights, Option Racing Tail lights, Custom Exaggerated lip kit, SXT rear spoiler

User avatar
Ianguilly
1GN Registrant
Posts: 1321
Joined: Thu Oct 22, 2009 9:28 am
Location: Cincinnati, OH

Post by Ianguilly » Sun Dec 06, 2009 12:48 am

how to on taking front fenders off.. please
Image
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"

-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.

NeonsRule24
1GN Registrant
Posts: 30
Joined: Wed Sep 05, 2007 6:30 pm
Location: Barrie Ontario canada

Post by NeonsRule24 » Tue May 04, 2010 9:17 pm

can anyone make a how-to for a dash swap from a 00-05 into a 1st gen? has anyone done it? or am i going to have to just try it and hope for the best?
1999 2 door Dodge Neon - daily driver
1983 ford thunderbird turbo coupe - project

User avatar
hotrod
1GN Registrant
Posts: 184
Joined: Wed Sep 30, 2009 1:31 pm
Location: GREATER BAY AREA
Contact:

Post by hotrod » Wed Aug 04, 2010 4:45 pm

Can I get a how-to on suicide hood & suicide/flip flop trunk Instructions?

Thank You... :mopar:
My Ne0n Project Can Be Found Here
http://teamtos.ca/forum/viewtopic.php?f=31&t=153
Image
IT'S JUST A NEON L0oL...

01neonrtblk
1GN Registrant
Posts: 32
Joined: Tue Mar 06, 2007 10:45 am
Location: Hanover Park, Il

Post by 01neonrtblk » Sat Oct 02, 2010 9:20 pm

i have a 1998 neon r/t 2 door and the driver side window wont go up, i am trying to figure if the motor is bad or not, i did notice that if i hit the window up or down button, it is taking power, but nothing happens, any ideas on how to fix it?
2001 Dodge Neon R/T

srt4eh
1GN Registrant
Posts: 496
Joined: Sun Nov 16, 2008 12:56 am
Location: Schofield Barracks, Hawaii

Post by srt4eh » Sat Oct 02, 2010 9:33 pm

take the door panel off and replace the window motor. If it is taking power then the switch works...if it doesn't go up it's the motor. Should be easy to swap out
98 Neon R/T, 00 Neon, 06 Jeep GC SRT-8
Image
Image

01neonrtblk
1GN Registrant
Posts: 32
Joined: Tue Mar 06, 2007 10:45 am
Location: Hanover Park, Il

Post by 01neonrtblk » Thu Oct 07, 2010 12:06 am

srt4eh wrote:take the door panel off and replace the window motor. If it is taking power then the switch works...if it doesn't go up it's the motor. Should be easy to swap out


here is a dumb question, i tried to take the motor out, but i am having issues getting it out, any tips?
2001 Dodge Neon R/T

Bigrick
1GN Registrant
Posts: 42
Joined: Fri Dec 10, 2010 10:12 am
Location: Owensboro ky

Post by Bigrick » Fri Dec 17, 2010 2:36 pm

I would like a how to. On instilling a manual brake kit. I've seen a block off plate for a brake booster on the big.org. I was wondering if someone could make a how to for it with pics. And the instill of the brake rod needed for the swap as well thank you.


Yours truly donkey nuts. Lol

Post Reply