I want to be sure I understand your build .... this is the 2.0 DOHC block, crankshaft, and head, with SRT-4 rods, pistons, rings etc.
So you'll end up with a 2.0 SRT-4 engine in the lighter 1GN R/T body?
If that's correct, I'll try it when my R/T engine wears out.
Project R/T turbo
Diane Sox wrote:I don't know all the keys to success, but the key to failure is trying to please everybody.
1952 Chevrolet Sport Coupe
1998 Toyota Avalon XLS
2005 Dodge Neon SRT-4
2009 Dodge Avenger SXT
http://www.killermopars.com/index.html
-
- 1GN Registrant
- Posts: 496
- Joined: Sun Nov 16, 2008 12:56 am
- Location: Schofield Barracks, Hawaii
no.....he's using a 2.4 block and the head from his 2.0laneholt wrote:I want to be sure I understand your build .... this is the 2.0 DOHC block, crankshaft, and head, with SRT-4 rods, pistons, rings etc.
So you'll end up with a 2.0 SRT-4 engine in the lighter 1GN R/T body?
If that's correct, I'll try it when my R/T engine wears out.
98 Neon R/T, 00 Neon, 06 Jeep GC SRT-8
- 1genRTturbo
- 1GN Registrant
- Posts: 468
- Joined: Sun Feb 28, 2010 5:20 pm
- Location: Tooele, ut
yeah what he said, its a 2.4 stratus block with the rotating parts from a srt and my 2.0 head cause of all the work i have done to it. but when im done with this swap, im going to try to build my 2.0 and see if the srt pistons will fit, i know my stratus pistons did fit in the bores though. so who knows.
It's not the fall that hurts, it's the sudden stop at the bottom!
- 1genRTturbo
- 1GN Registrant
- Posts: 468
- Joined: Sun Feb 28, 2010 5:20 pm
- Location: Tooele, ut
- 1genRTturbo
- 1GN Registrant
- Posts: 468
- Joined: Sun Feb 28, 2010 5:20 pm
- Location: Tooele, ut
well been on this one seriously for days now, got the head built, cams installed, and timing cover (new srt with new srt timing components) all put together. just got my MM adapter and my p/s bracket from modern. now all i'm waiting on is my alt brakets from the dealership to come. pics up later this weekend.
It's not the fall that hurts, it's the sudden stop at the bottom!
- 1genRTturbo
- 1GN Registrant
- Posts: 468
- Joined: Sun Feb 28, 2010 5:20 pm
- Location: Tooele, ut
so i failed with new pics, and it started to rain and was dark today, but motor has been finished, and the old motor and trans is FINALLY out. car is missing the front bumper, headlights, hood, and fenders. looks rediculous right now. but if it stops raining by tomorrow, then i'll have the new motor at least attatched to the trans and installed in the car. more to come.
It's not the fall that hurts, it's the sudden stop at the bottom!
- 1genRTturbo
- 1GN Registrant
- Posts: 468
- Joined: Sun Feb 28, 2010 5:20 pm
- Location: Tooele, ut