Want to explain How-To do something to make life easier for the next person? Post your detailed instructions here that explain the process you went through to fix, install, or whatever you want. This IS NOT the place to ask how to do something, please ask those questions in one of the other topic specific boards.
-
SPARKZ
- 1GN Registrant
- Posts: 184
- Joined: Sun Sep 16, 2007 12:23 am
- Location: San Antonio TX
-
Contact:
Post
by SPARKZ » Wed Apr 09, 2008 5:21 am
Lackof wrote:^Holly hell that's a lot to ask.
I will be getting up a how to here shortly on installing rocker and lifters on the DOHC neon without removing the camshafts, for those interested.
Actually skill already posted up that. but still a good one tho a for effort
-
robert 'bob' paulson
- 1GN Registrant
- Posts: 829
- Joined: Sun Jan 28, 2007 7:18 pm
- Location: Elmira Heights, NY
Post
by robert 'bob' paulson » Wed Apr 09, 2008 12:29 pm
SPARKZ wrote:Lackof wrote:^Holly hell that's a lot to ask.
I will be getting up a how to here shortly on installing rocker and lifters on the DOHC neon without removing the camshafts, for those interested.
Actually skill already posted up that. but still a good one tho a for effort
Lackof = Skill and he has since edited all information out of his how-to's
-
78jdg87
- 1GN n00b
- Posts: 13
- Joined: Sun Mar 29, 2009 3:05 pm
- Location: Sedona, AZ
Post
by 78jdg87 » Mon Mar 30, 2009 3:46 am
Requesting info to fix doors... the window goes too high to close properly.
1998 Dodge Neon 2dr. DOHC
Wide body flares, AIR Projector Headlights, Option Racing Tail lights, Custom Exaggerated lip kit, SXT rear spoiler
-
Ianguilly
- 1GN Registrant
- Posts: 1321
- Joined: Thu Oct 22, 2009 9:28 am
- Location: Cincinnati, OH
Post
by Ianguilly » Sun Dec 06, 2009 12:48 am
how to on taking front fenders off.. please
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"
-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.
-
NeonsRule24
- 1GN Registrant
- Posts: 30
- Joined: Wed Sep 05, 2007 6:30 pm
- Location: Barrie Ontario canada
Post
by NeonsRule24 » Tue May 04, 2010 9:17 pm
can anyone make a how-to for a dash swap from a 00-05 into a 1st gen? has anyone done it? or am i going to have to just try it and hope for the best?
1999 2 door Dodge Neon - daily driver
1983 ford thunderbird turbo coupe - project
-
hotrod
- 1GN Registrant
- Posts: 184
- Joined: Wed Sep 30, 2009 1:31 pm
- Location: GREATER BAY AREA
-
Contact:
Post
by hotrod » Wed Aug 04, 2010 4:45 pm
Can I get a how-to on suicide hood & suicide/flip flop trunk Instructions?
Thank You...
-
01neonrtblk
- 1GN Registrant
- Posts: 32
- Joined: Tue Mar 06, 2007 10:45 am
- Location: Hanover Park, Il
Post
by 01neonrtblk » Sat Oct 02, 2010 9:20 pm
i have a 1998 neon r/t 2 door and the driver side window wont go up, i am trying to figure if the motor is bad or not, i did notice that if i hit the window up or down button, it is taking power, but nothing happens, any ideas on how to fix it?
2001 Dodge Neon R/T
-
srt4eh
- 1GN Registrant
- Posts: 496
- Joined: Sun Nov 16, 2008 12:56 am
- Location: Schofield Barracks, Hawaii
Post
by srt4eh » Sat Oct 02, 2010 9:33 pm
take the door panel off and replace the window motor. If it is taking power then the switch works...if it doesn't go up it's the motor. Should be easy to swap out
98 Neon R/T, 00 Neon, 06 Jeep GC SRT-8
-
01neonrtblk
- 1GN Registrant
- Posts: 32
- Joined: Tue Mar 06, 2007 10:45 am
- Location: Hanover Park, Il
Post
by 01neonrtblk » Thu Oct 07, 2010 12:06 am
srt4eh wrote:take the door panel off and replace the window motor. If it is taking power then the switch works...if it doesn't go up it's the motor. Should be easy to swap out
here is a dumb question, i tried to take the motor out, but i am having issues getting it out, any tips?
2001 Dodge Neon R/T
-
Bigrick
- 1GN Registrant
- Posts: 42
- Joined: Fri Dec 10, 2010 10:12 am
- Location: Owensboro ky
Post
by Bigrick » Fri Dec 17, 2010 2:36 pm
I would like a how to. On instilling a manual brake kit. I've seen a block off plate for a brake booster on the big.org. I was wondering if someone could make a how to for it with pics. And the instill of the brake rod needed for the swap as well thank you.
Yours truly donkey nuts. Lol