How to: walmart fogs up to stock fog light plug/switch

Post Reply
User avatar
subzero
1GN Registrant
Posts: 237
Joined: Thu Jan 07, 2010 6:26 am
Location: western wisconsin

How to: walmart fogs up to stock fog light plug/switch

Post by subzero » Mon Jun 14, 2010 12:44 am

keep in mind this is for the people that didnt have fog lights and want fog lights and not have to cut into ur interior panels.

things needed:
wiring harness with foglight plug
foglight switch with rear defroster
fog lights
squeeze connectors
wire cutters
pliers

ok so first get what ever foglights you want and it will come with 3 diff colored wires red(power) black(ground for lighted switch) white (accessory).

the only wire youll need is the white accessory wire connect up the fogs lights to the white wire and their grounds.

run the wire to the interior snip off the connector that comes on it (DO NOT STRIP ANY WIRES) and take a squeeze connector and insert the wire and the light blue and black wire into the connector and squeeze down teh metal tab with your pliers then close the door that covers the tab and locks it there. and test them and there you go you have walmart fogs hooked up to the stock plug.
Image

Post Reply