How To: Suspension Install

Post Reply
User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

How To: Suspension Install

Post by 1fast2liter » Thu Mar 01, 2007 4:08 am

this is a pretty straight forward... If you have power tools then use them as i don't know anyother way to do it..........


step 1) put the car on jack stands or a body lift.

step 2) remove the tires.....

step 3) remove the 2 bolts that join the strut to the front knuckle theis are 18mm.. use a mallet to remove the bolts from the lower strut.. same goes for the back. their is also a 10mm bolt that holds the brake lines to the strut undo those too.

step 4) their are three bolts that hold the strut onto the car in fron and 4 in back acessed thru the trunk. theis are 13mm undo all and with a little manuvering they will come out....

ste 5) here you need spring compressors for a mcpherson style strut. autozone rents a set for $40... clamp theis on and run them down with eaither a inpact gun or a air ratchet..

step 6) i hold the strut between my legs tilted away from me using my impact gun a socket extension and i think its a 14mm or 15mm socket.
push down as hard as you can and zip them off. un zip the clamp and the hat and pillow bearing and isolater will come off..

step 7) now replace with desired spring and reassemblie in reverse order.... when putting it all togeather make sure the bottom 2 strut bolts are seated firmly thun the nuts put on. i usally install the bottom first then the tops.... then if further assistance is needed us a jack to help compress the spring a little to get it in... throw your tires on and lower the car... softly. go out and make a few sharp left to right movments to help settle the suspension a bit..... over then next months or next oil chnge recheck top strut nuts to make sure their seated tight still.



enjoy.
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
Lackof
1GN Registrant
Posts: 2599
Joined: Mon Feb 05, 2007 10:24 pm
Location: Jacksonville, FL

Post by Lackof » Thu Mar 01, 2007 11:43 am

this might help ...

Image
Image
Image

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Thu Mar 01, 2007 12:47 pm

yup that'll work too.....i would also like to add to this and one doing a lowering job them selve... consider what you want out of it.... i always recomend that you replace the struts with a set of kybs,konis, or some sort of aftermarket strut. as far as springs and kits go.. stay away from ebay sleeve kits they are more dangerous then good. If you want some thing with adjustability then go with a true strut coilover kit, eiback, dropzone,k sport,kw, and mopar all have strut coilover kits that are of pretty good quality.


springs are another topic. you want to auto cross? look good for the street? the spring must match your application... i recomend sprint,eiback and b&g goldline are seem decent brands to lower a car with springs......
auto cross you can find a set of x high rates from mopar or some such source. pared with konis makes a good auto x setup.

please if you decide to eaither 1 heat or 2 cut your springs do so at your own risk. this is not safe and can potentially harm you and your ride. especially if you have no idea what you are doing. i rode with heated springs for a yr and went to a sleeve kit wich was a decent brand and still rode hard. i know reside on a true strut/coilover set up.

i had a buddy who had cut springs and i hated his car. if you wanna do it do it right the first time and don't regret the way you did it.


happy cruising.
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

adammmmmm
1GN n00b
Posts: 9
Joined: Sun Sep 16, 2007 5:11 pm

Post by adammmmmm » Sun Oct 14, 2007 8:36 am

I recently ordered eibach springs from modern performance, I have NO clue how to start the process of putting them on, i have friends who do but they totally put down the neon, how would buying konis' make a difference in the ride i would get?

i want it low, but i still want it to feel smooth, you know?

if anyone would respond, it would be greatly appreciated

User avatar
Lackof
1GN Registrant
Posts: 2599
Joined: Mon Feb 05, 2007 10:24 pm
Location: Jacksonville, FL

Post by Lackof » Sun Oct 14, 2007 11:10 pm

adammmmmm wrote:I recently ordered eibach springs from modern performance, I have NO clue how to start the process of putting them on, i have friends who do but they totally put down the neon, how would buying konis' make a difference in the ride i would get?

i want it low, but i still want it to feel smooth, you know?

if anyone would respond, it would be greatly appreciated
Anytime you lower a car the ride isn't goin to be smooth or for that matter smoother.

KONIs will make a world of difference and allow for adjusting to soft or hard and not fail as quickly as the stock ones would do.

As far as doing the spring install just get a hayness manual and you should be set.
There really isn't anything to difficult about it, but you will need a spring compressor which you can rent from autozone (give them a deposit bring back tool and you get your money back).
After the install you will need an alignment too.

chipdogg
1GN Registrant
Posts: 2180
Joined: Wed Mar 14, 2007 12:30 pm
Location: Muscoda, wi

Post by chipdogg » Sun Oct 14, 2007 11:16 pm

You'll need an impact gun to get strut nut loose otherwise it just spins.
'97 black ACR coupe- #3 - Scrappy
'96 black coupe- #4
'97 magenta coupe- #10 - 13.379 @ 101.07 mph
'04 SXT mtx - #45 - GF's DD
'96 ACR
'95 Astro Van
'11 Chevy Express
'02 atx - #48
'98 Intense Blue R/T - #49
'04 SRT-4 - #50
'99 Intense Blue R/T - #51

52 and counting, when will it stop?

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Mon Oct 15, 2007 4:44 pm

chipdogg wrote:You'll need an impact gun to get strut nut loose otherwise it just spins.
I stopped using the impact on strut nuts because it can junk the strut. Instead, I use a 13/16 spark plug socket for the strut nut and a 10mm 1/4" drive deep socket to hold the piston nut.

Almost all spark plug sockets have a hex on the end of them for a 7/8" wrench. Put the 10mm socket in through the spark plug socket and turn the spark plug socket with the 7/8" wrench while holding the piston nut with a 1/4" breaker bar.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

Post Reply