How To: Jeep 60mm TB Mod for neon "uploaded pic's"

2.4tneon
1GN Registrant
Posts: 25
Joined: Tue Apr 10, 2007 7:59 pm
Location: NPR, Florida

Post by 2.4tneon » Tue Apr 15, 2008 12:05 am

rdhzrd62902 wrote:did you just cut the spring for the manual return spring?? thats my only problem LOL
there should be two springs together on the stock TB, i just used one spring.
TnemmoCoNdo wrote:do you have a picture of the 60mm installed on your neon? im just wondering what it actually looks like on a neon. thanx

-Jon
i dont have a picture but ill take one as soon as i can.
97' 2 door with a 99' 2.4
Image

it all comes down to people not having the knowledge, being scared, or being lazy. Without those things you can save a bunch of money in life!

TnemmoCoN
1GN Registrant
Posts: 91
Joined: Tue Sep 25, 2007 9:25 pm
Location: Lodi, CA

Post by TnemmoCoN » Tue Apr 15, 2008 1:56 am

2.4tneon wrote:
TnemmoCoNdo wrote:do you have a picture of the 60mm installed on your neon? im just wondering what it actually looks like on a neon. thanx

-Jon
i dont have a picture but ill take one as soon as i can.
muchos gracias amigo

-Jon

User avatar
lexxerd
1GN Registrant
Posts: 24
Joined: Mon Jul 20, 2009 8:22 pm
Location: Charlotte NC

Post by lexxerd » Sun Sep 06, 2009 7:12 pm

Anyone selling a modded or non modded jeep TB PM me.

00Neon RCR
1GN n00b
Posts: 4
Joined: Mon Mar 14, 2011 1:48 pm
Location: Antrim, Nova Scotia

Post by 00Neon RCR » Mon Mar 14, 2011 1:54 pm

Hey guys, can I use my 2gn throttle body for parts to do the mod? I am using a 1gn DOHC intake manifold for my 2.4T swap. I did not pick up a 1gn DOHC throttle body but have a couple 2gn ones around. Let me know!

Adam
2002 Chrysler Neon R/T - SRT swap in progress

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Mon Mar 14, 2011 9:58 pm

I don't think you can. I'm not very familiar with the 2gn throttle body, but from what I remember it's not really what you can use.
Image
Image

00Neon RCR
1GN n00b
Posts: 4
Joined: Mon Mar 14, 2011 1:48 pm
Location: Antrim, Nova Scotia

Post by 00Neon RCR » Mon Mar 14, 2011 11:08 pm

So just to clarify everything, as long as I am using a MTX dohc neon throttle body, I can just use the jeep sensors? Or no, cause that is what I understood, but yet that would make no sense or else all I'd have to do is drill the holes a little bigger and then figure out a way to get the throttle cable to connect onto it.

Adam
2002 Chrysler Neon R/T - SRT swap in progress

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Tue Mar 15, 2011 10:38 pm

I think you just use neon sensors. That would make sense anyway.
Image
Image

00Neon RCR
1GN n00b
Posts: 4
Joined: Mon Mar 14, 2011 1:48 pm
Location: Antrim, Nova Scotia

Post by 00Neon RCR » Tue Mar 15, 2011 11:09 pm

Ya true. Wonder if my 2gn sensors will work or atleast use the same plugins on my 2gn harness. And if they don't wonder if I could just change the plugs on the harness or maybe some wires be different? I'm going to ask couple guys on 2gn.
2002 Chrysler Neon R/T - SRT swap in progress

2drSRT4
1GN Registrant
Posts: 853
Joined: Mon Feb 28, 2011 7:12 pm
Location: El Paso, TX

Post by 2drSRT4 » Wed Mar 16, 2011 1:01 am

Yeah, I say ask 2gn guys. They would know better than us. I don't know 2gns very much
Image
Image

Post Reply