Ebay UDP Belt Sizes Right Here~!

This is the forum for technical articles, part numbers, history, and other information about the 1st gen Neon.
Post Reply
Rags
1GN Registrant
Posts: 55
Joined: Sat May 29, 2010 1:47 am
Location: Arizona

Ebay UDP Belt Sizes Right Here~!

Post by Rags » Mon Jun 07, 2010 1:54 am

I thought I would post up Belt Sizes for the Ebay UDP "Under Drive Crank Pulley", sometimes finding this info is hard.... This is for Ribbed style alternator belt and v-belt style for A/C-P/S ......
Most of the Street UDP pulleys are the same size ....


Power Steering with AC- Bando 2455, Dayco 15455, Gates 7455

Power Steering without AC- Bando 2375, Dayco 15375, Gates 7375

Alt. Belt- Bando 4PK775, Dayco 5040305, Gates KO40305

A/C compressor with no Power Steering - Dayco 15330

The Dayco 15330 number is for cross reference, I have found to use a cheaper belt like a Duralast or Value as you have to roll the belt on for A/C with no Powersteering Pump for adjustment... the Dayco is pretty stiff and does not stretch. I ran no P/S pump for years with just A/C and the belt size worked great for me, would go 25,000 to 50,000 miles before it would start to squeal ...

:P
1995 Plymouth Strawberry 4 door was SOHC ATX with now a full 98 R/T DOHC MTX everything swap front to back ....300,000 miles on 95 before being reborn as a 98 R/T with 68,000 miles.

http://www2.cardomain.com/ride/779073

yangyan

Post by yangyan » Sun Dec 04, 2011 8:00 pm

Have a look!

User avatar
Ianguilly
1GN Registrant
Posts: 1321
Joined: Thu Oct 22, 2009 9:28 am
Location: Cincinnati, OH

Post by Ianguilly » Sun Dec 04, 2011 8:27 pm

:spam1:
Image
-Neon #3 1999 Dodge Neon R/T, Flame Red, DOHC MTX, Goodies, "Christine X2"

-Neon #6 95 NYG sport coupe SOHC MTX, 1 0f only 527
jamieely wrote: There are 2 kinds of people here, those with coupes, and then the other guys. If srt4s were coupes I would have one.

Post Reply