Possible Part-Out

Post any 1st gen Neon parts you have to sell here!
Jbrown
1GN Registrant
Posts: 59
Joined: Fri Mar 02, 2007 3:27 pm
Location: Charlotte, NC

Possible Part-Out

Post by Jbrown » Thu Mar 29, 2007 4:56 am

Im thinking about parting out my neon. including:

vertical door hinges- 750lb pressure rated shocks -sold-
srt4 turbo manifold(brand new)
srt4 intercooler (used)
srt4 o2 housing
wings west wing
8.6:1 forged je pistons(new) -pending-
eagle connecting rods(new) -pending-
polished crankshaft
blank engine block bored .20 over and honed
complete dohc cylinder head- 3 angle valve job performed, resurfaced, new valve seals.. just missing camgears
kyb gr2 struts
skunk 2 springs

im gettin a little tired of messin with my car....i want to at least get enough for a down payment on a srt4
this is just an idea for now, more than likely ill end up doing it....ill keep everyone updated though...
Last edited by Jbrown on Sat Mar 31, 2007 12:52 pm, edited 1 time in total.
96 Neon SOHC

aka FastNeon84

User avatar
neonfuzz614
1GN Registrant
Posts: 117
Joined: Wed Feb 14, 2007 10:34 pm

Post by neonfuzz614 » Thu Mar 29, 2007 8:51 am

what would youwant for the springs and shocks
Image

Jbrown
1GN Registrant
Posts: 59
Joined: Fri Mar 02, 2007 3:27 pm
Location: Charlotte, NC

Post by Jbrown » Thu Mar 29, 2007 9:32 am

well for both i paid 350 new....since theyre 2 months old....$225, if i do decide to part my car out....it probably wouldnt be til i get out of college...in may..just wanted to throw it out there and give you guys a heads up
96 Neon SOHC

aka FastNeon84

User avatar
BIGRAM
1GN Registrant
Posts: 998
Joined: Mon Feb 12, 2007 2:18 pm
Location: Warren, MI

Post by BIGRAM » Thu Mar 29, 2007 11:45 am

:cry: :cry: another one bites the dust, hopefully by that time i'll have some more money i'd definitely buy some stuff
Image

User avatar
Lackof
1GN Registrant
Posts: 2599
Joined: Mon Feb 05, 2007 10:24 pm
Location: Jacksonville, FL

Post by Lackof » Thu Mar 29, 2007 11:56 am

out of curosity how much u letting the vertical doors going for?

dunny
1GN Registrant
Posts: 31
Joined: Mon Mar 05, 2007 11:18 am
Location: Middletown, Ohio

Post by dunny » Thu Mar 29, 2007 2:09 pm

Nah, don't do it - keep your project alive :)

I've had both and prefer the 1st gen coupe. Less power required to move it down the track in a hurry! A lot cheaper to play with as well....cheaper to insure, better gas mileage.....

Now if you want to go RWD/AWD route then possibly part it.....but to be honest I sold my SRT4 because I like my first gen more ;)
dunny
'03 SRT4 12.774@106.09 - sold :(

'96 DOHC SC 11.948@116.98mph
SRT-4 turbo powered

'03 Solar Yellow sXt - 17.199@78.48 1/4
'04 SXT Dakota CC 4x4
'88 "Mopar Express" Dakota - sold

Jbrown
1GN Registrant
Posts: 59
Joined: Fri Mar 02, 2007 3:27 pm
Location: Charlotte, NC

Post by Jbrown » Thu Mar 29, 2007 4:19 pm

Skill wrote:out of curosity how much u letting the vertical doors going for?
$275. took them off a few minutes ago
96 Neon SOHC

aka FastNeon84

Jbrown
1GN Registrant
Posts: 59
Joined: Fri Mar 02, 2007 3:27 pm
Location: Charlotte, NC

Post by Jbrown » Thu Mar 29, 2007 4:23 pm

dunny wrote:Nah, don't do it - keep your project alive :)

I've had both and prefer the 1st gen coupe. Less power required to move it down the track in a hurry! A lot cheaper to play with as well....cheaper to insure, better gas mileage.....

Now if you want to go RWD/AWD route then possibly part it.....but to be honest I sold my SRT4 because I like my first gen more ;)
i hear ya man....but i get real frustrated when dum stuff happens....alot of small things in the past....and im just tired of messin with it....im looking at another 1500-2000 to get my swap done right....i dont want to mess with it and screw something up. so pretty much im just looking for something a little newer...im at school right now, but ill come up with a parts list and post it up in the f/s section later on.

if any one knows a good place to search for an 03-05 srt4 in good condition...let me know...thanks
96 Neon SOHC

aka FastNeon84

User avatar
dawm
1GN Registrant
Posts: 89
Joined: Mon Feb 12, 2007 8:51 am
Location: Wayne, MI

Post by dawm » Thu Mar 29, 2007 7:26 pm

2.0 or 2.4?

if 2.4 what do you want for the rods? i just bought pistons (will be here tomorrow) and need rods.. cyl1 on my 2.4 was out of spec for stock srt pistons =(
06 Subaru STI WRB ~ BC Coilovers, Kartboy Bushings
98 Neon R/T 2.4L Turbo Coupe ~ Project car
2007 -Purchased and stripped
2011 -Needs a tune and minor things
02 Neon R/T ~ 08/08/08 -traded for the 07 Caliber R/T (03/14/11 -traded Caliber for STI)
---
http://www.st1ck3rs.com
http://www.detroitneonowners.org

neonblitzn
1GN n00b
Posts: 11
Joined: Mon Mar 19, 2007 9:51 pm
Location: edmonton,alberta, canada eh

Post by neonblitzn » Fri Mar 30, 2007 12:05 am

how much well u be looking for the turbo and intercooler and o2 housing
98 Ex 2.4 swap
PaceSetter header, 3.0 cia, UDP, 2.0 cams. dual force clutch.

Jbrown
1GN Registrant
Posts: 59
Joined: Fri Mar 02, 2007 3:27 pm
Location: Charlotte, NC

Post by Jbrown » Fri Mar 30, 2007 3:23 am

unfortunately its 2.0 rods and pistons dawm...but neonblitz, for the turbo manifold, intercooler, and o2 housing....ill do $375...the turbo is brand new and has never seen boost...a couple of fins bent on the intercooler, but its still in good shape....the o2 housing i sandblasted to get that brown rust color off of it..
96 Neon SOHC

aka FastNeon84

Jbrown
1GN Registrant
Posts: 59
Joined: Fri Mar 02, 2007 3:27 pm
Location: Charlotte, NC

Post by Jbrown » Fri Mar 30, 2007 3:25 am

heres the parts list:

Price List( does not include shipping..i need the city and state u live in to determine)

lambo door kit $275-pending sale
srt4 turbo manifold(brand new) $300
srt4 intercooler (used) $75
srt4 o2 housing(sandblasted) $25
stock wastegate $25
wings west wing $75
8.6:1 forged je pistons & eagle connecting rods $650
polished crankshaft (make resonable offer)
blank engine block bored .20 over and honed(make reasonable offer)
complete dohc cylinder head- resurfaced, new valve seals.. just missing camgears $225

when im able to get my stock suspension back.... i will also sell the kyb gr2 struts/skunk 2 lowering springs for $225-only 2 months old
96 Neon SOHC

aka FastNeon84

neonblitzn
1GN n00b
Posts: 11
Joined: Mon Mar 19, 2007 9:51 pm
Location: edmonton,alberta, canada eh

Post by neonblitzn » Sat Mar 31, 2007 3:27 am

will u ship to canada
98 Ex 2.4 swap
PaceSetter header, 3.0 cia, UDP, 2.0 cams. dual force clutch.

Jbrown
1GN Registrant
Posts: 59
Joined: Fri Mar 02, 2007 3:27 pm
Location: Charlotte, NC

Post by Jbrown » Sat Mar 31, 2007 6:25 am

yea sure...what are you interested in?
96 Neon SOHC

aka FastNeon84

BlackRT?
1GN Registrant
Posts: 91
Joined: Mon Feb 12, 2007 10:02 pm

Post by BlackRT? » Sat Mar 31, 2007 8:16 am

whats the wings west wing look like got any pics?
Image
98 Black r/t 2.4L w/boltons

Post Reply