98 PGT
Oh yeah... updates, lol
Ordered JE 10.5:1 pistons w/rings and Eagle rods.
Lubing will be provided by a melling oil pump.
A full gasket set and a blue gates timing belt to wrap the AEM tru time gear.
A MPX 60mm TB.
A red MSD Coil pack and Granatelli wires.
The shorty Hedman header is waiting in the corner.
Ordered a UDP but found out it was for a 2GN when it arrived, so its going to be resold sense its of no use to me.
* Looking for a SOHC no-90* manifold, But I might build a getto blaster.
Now here is the dilemma, I have a 95 cam, but leaning to using a magnum cam and springs, and yes Ill be doing the head work (P&P) Ill even be cleaning up the ports in the block.
Ideas on a color for the block and V-cover?
Ordered JE 10.5:1 pistons w/rings and Eagle rods.
Lubing will be provided by a melling oil pump.
A full gasket set and a blue gates timing belt to wrap the AEM tru time gear.
A MPX 60mm TB.
A red MSD Coil pack and Granatelli wires.
The shorty Hedman header is waiting in the corner.
Ordered a UDP but found out it was for a 2GN when it arrived, so its going to be resold sense its of no use to me.
* Looking for a SOHC no-90* manifold, But I might build a getto blaster.
Now here is the dilemma, I have a 95 cam, but leaning to using a magnum cam and springs, and yes Ill be doing the head work (P&P) Ill even be cleaning up the ports in the block.
Ideas on a color for the block and V-cover?
Here is a teaser of the up and coming.
JE 10.5:1 pistons
Eagle rods
Mopar Bearings
Melling oil pump
03 Magnum/Rt cam and Springs
AEM tru time Cam gear
5" UDP
What you dont see is......
mandrel bent 2.5" catback
Hedman header.
Blue gates T-belt
MPX 60mm TB
MSD coil pack
Granatelli wires
Full gasket kit
Now what color to paint the block and V-cover?
Wrinkle Red or Wrinkle Black?
JE 10.5:1 pistons
Eagle rods
Mopar Bearings
Melling oil pump
03 Magnum/Rt cam and Springs
AEM tru time Cam gear
5" UDP
What you dont see is......
mandrel bent 2.5" catback
Hedman header.
Blue gates T-belt
MPX 60mm TB
MSD coil pack
Granatelli wires
Full gasket kit
Now what color to paint the block and V-cover?
Wrinkle Red or Wrinkle Black?
coil pack is read so i say black valve cover and red block........ make that puppy pop!
oh nice parts list by the way
oh nice parts list by the way
97 dodge neon sedan 2.0 sohc
http://forum.1gn.org/viewtopic.php?t=7952&start=0
96 dodge neon sedan 2.4 swap
http://forum.1gn.org/viewtopic.php?t=8602
http://forum.1gn.org/viewtopic.php?t=7952&start=0
96 dodge neon sedan 2.4 swap
http://forum.1gn.org/viewtopic.php?t=8602
What goes in must come out.
With the 60mm MPX TB and a Boxed manifold that Hedman header will work just fine.
Found out what my CTS issue was all about. lol
Brand new BWD cam sensor, 45 bux, and the blasted thing is in two pieces. need to find the receipt.
The dismantling of the old motor...
The carnage!!!!
That piston stuck/melted into the cylinder wall.
The rings dont move on this side, they are welder and apart of the piston now, see the section missing from the hat? thats whats on the cylinder wall.
There is going to be a little work done to this head, lol
We will see what the machine shop says on what magic they can do to the block.
With the 60mm MPX TB and a Boxed manifold that Hedman header will work just fine.
Found out what my CTS issue was all about. lol
Brand new BWD cam sensor, 45 bux, and the blasted thing is in two pieces. need to find the receipt.
The dismantling of the old motor...
The carnage!!!!
That piston stuck/melted into the cylinder wall.
The rings dont move on this side, they are welder and apart of the piston now, see the section missing from the hat? thats whats on the cylinder wall.
There is going to be a little work done to this head, lol
We will see what the machine shop says on what magic they can do to the block.
Last edited by northern on Tue Dec 11, 2012 11:34 pm, edited 1 time in total.
- 1genRTturbo
- 1GN Registrant
- Posts: 468
- Joined: Sun Feb 28, 2010 5:20 pm
- Location: Tooele, ut