Beer Can SOHC All Motor Drag Car
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
Beer Can SOHC All Motor Drag Car
here's the link to my project log on neons.org:
http://forums.neons.org/viewtopic.php?t=272027
I will update this with more info later. Just making me a space to start a log here. Comments good and bad are all welcome.
Mike
http://forums.neons.org/viewtopic.php?t=272027
I will update this with more info later. Just making me a space to start a log here. Comments good and bad are all welcome.
Mike
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
Ok, so I got the Pistons in the block last night.
And then I got everything buttoned up and put the pan back on.
Thats it so far I put the water pump back on today. I'm still waiting on getting my air compresor fixed so i can finish my head portng and get the head put back onwith the crane 14 and magnum springs. I also just bought some AR-24's to mount my slicks on. It's getting nice outside and I'd really like to get this car running cause the tracks are opening. Still a lot of work to do though. Hopefully done and running low 13's by N2k7. Think a 12.9 is possible in the future of this car on a n/a SOHC setup?
Mike
And then I got everything buttoned up and put the pan back on.
Thats it so far I put the water pump back on today. I'm still waiting on getting my air compresor fixed so i can finish my head portng and get the head put back onwith the crane 14 and magnum springs. I also just bought some AR-24's to mount my slicks on. It's getting nice outside and I'd really like to get this car running cause the tracks are opening. Still a lot of work to do though. Hopefully done and running low 13's by N2k7. Think a 12.9 is possible in the future of this car on a n/a SOHC setup?
Mike
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
- chrono_killa
- 1GN Registrant
- Posts: 963
- Joined: Wed Feb 14, 2007 8:44 pm
- Location: sacramento, CA
the green
My Cars-98 plymouth highline neon, atx, msd coil, 3.0 intake, ebay udpBIGRAM wrote:i ain't gay you sucked my dick
Future mods- magnum head, magnum header, rims, msd wires, 60mm tb, dohc pistons, 2.5" dual exhaust, modded valvebody, filled mounts, switch to a tach cluster with green leds and some more shit
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
- Archametes
- 1GN Registrant
- Posts: 776
- Joined: Tue Feb 13, 2007 10:06 pm
- Location: Red Hook, NY
- Contact:
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
Today I started going through the meticulous process of removing all the wiring from my car that I dont need. This includes the wiring for the stereo, tail lights, interior lights, heat/air controls, e-brake sensor, seatbelt/door sensors, turn signal wiring, headlight switch wiring, and basically anything else that isnt essential to the running of the vehicle.
It really cleans things up on the inside of the car and as a bonus I removed about 8 lbs worth of wire/insulation. I still need to get under the hood and remove some excess wiring there.
Mike
It really cleans things up on the inside of the car and as a bonus I removed about 8 lbs worth of wire/insulation. I still need to get under the hood and remove some excess wiring there.
Mike
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
-
- 1GN Registrant
- Posts: 1388
- Joined: Mon Feb 12, 2007 8:14 pm
- Location: Granville, NY
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
LOL yeah. I just felt like showing y'all that I have fun getting a little dirty. Ok maybe really dirty.vielecustoms wrote:The Shocker would have been better if you were giving it to the engine... but love the color
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
Woot!
A nice package containing my AR-24's came in on Saturday. Now I can get my slicks mounted up.
Also yesterday I fixed my air compressor so I can recommence porting and finally get my head reassembled and get this bitch of an engine back together and in the car.
A nice package containing my AR-24's came in on Saturday. Now I can get my slicks mounted up.
Also yesterday I fixed my air compressor so I can recommence porting and finally get my head reassembled and get this bitch of an engine back together and in the car.
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
-
- Administrator
- Posts: 726
- Joined: Mon Feb 12, 2007 10:02 am
- Location: Maryland
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
I'm leaving the 3rd brake light wired up.racer12306 wrote:what are you going to have for your one working tail light?
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
-
- Administrator
- Posts: 726
- Joined: Mon Feb 12, 2007 10:02 am
- Location: Maryland
-
- 1GN Registrant
- Posts: 205
- Joined: Tue Feb 13, 2007 11:21 am
- Location: Altoona, PA
Wired up to the brake pedal switch. It's on like a running light normally and then lights up brighter when the brake is applied. Just like a normal brake light.
'95 N/A SOHC Budget Drag Car in the works!
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.
Shooting for some low 13's/high 12's by the end of summer.
Looking for some cheap magnum valve springs, a solid FMM, a solid bobble, and a nice non-mod clutch setup.