Drop dat bish....
- Diablo0
- 1GN.org Owner/Admin
- Posts: 777
- Joined: Thu Jan 25, 2007 4:39 am
- Location: Greenville, SC - Pelzer
- Contact:
Drop dat bish....
Originally on stock SRT springs w/ stock SRT struts with one regular Neon strut and spring:
Before on 1st gen R/T springs w/ stock SRT struts and one regular Neon strut and spring(ghetto y0):
NOW BC Inverted Coilovers lowered to 1 finger gap. Low enough that without a few boards at the end of the driveway, I can't get out without my pinch welds or exhaust scraping the driveway
Before on 1st gen R/T springs w/ stock SRT struts and one regular Neon strut and spring(ghetto y0):
NOW BC Inverted Coilovers lowered to 1 finger gap. Low enough that without a few boards at the end of the driveway, I can't get out without my pinch welds or exhaust scraping the driveway
- Diablo0
- 1GN.org Owner/Admin
- Posts: 777
- Joined: Thu Jan 25, 2007 4:39 am
- Location: Greenville, SC - Pelzer
- Contact:
Thanks guys Vin... I'm actually planning on doing that to see what they look like and see how well they fit since the SRT offset is different from the Neon. The wheels i'm looking at for it are 17x8 w/ 35mm offset and the stock SRT wheels are 45mm. meaning they'll stick out a little over 1.25" more than stock. I just want to see where that will put me for the fender as it will probably stick out and not look right :-/ But yeah... I'm debating on swapping them over for this weekend since we have an SRT meet here at Hooters on Sunday.
Camera... it's a little outdated since the newer models are out now but it's a Panasonic Lumix DMC-FZ20
Camera... it's a little outdated since the newer models are out now but it's a Panasonic Lumix DMC-FZ20
(I still rock the 2MP Kodak you guys were calling ghetto 2 years ago so don't feel bad )
I didn't know SRTs used a different offset then regular 2nd gens. Different knuckles/hubs F and R?
I didn't know SRTs used a different offset then regular 2nd gens. Different knuckles/hubs F and R?
suave23 wrote:Can you imagine how much pussy you'd pull if you had a pet monkey riding your pet dog with you everywhere you went?
- Diablo0
- 1GN.org Owner/Admin
- Posts: 777
- Joined: Thu Jan 25, 2007 4:39 am
- Location: Greenville, SC - Pelzer
- Contact:
Yeah the SRT knuckles are different in the front as the brake setups are completely different. The rear spindles are almost the same as the R/T and ACR spindles but the tension strut bolt point at the bottom is just a little different to allow more clearance by the wheel. Brake setup is the same, calipers are the same, rotors are a tad thicker but overall it's identical. Front is way different though for brake setups...
-
- 1GN Registrant
- Posts: 151
- Joined: Mon Mar 05, 2007 7:31 pm
- Location: The Hood
I heart your Neons. Both of them are so clean and the white one looks so good dropped. Poster children for the perfect 2gn R/Ts.
~Crystal
1995 Dodge Neon Sport MTX / 2002 Dodge Neon ATX
http://www.cardomain.com/ride/2063634
http://www.ridespace.net/users/steelblue/
1995 Dodge Neon Sport MTX / 2002 Dodge Neon ATX
http://www.cardomain.com/ride/2063634
http://www.ridespace.net/users/steelblue/