has anybody every got cross drilled rotors from ebay

Have some questions about how to achive better handling and stopping power? Questions about 1st gen Neon suspension, steering and braking systems belong right here!
Post Reply
projectneon1998
1GN Registrant
Posts: 201
Joined: Mon Mar 15, 2010 4:02 pm
Location: ohio

has anybody every got cross drilled rotors from ebay

Post by projectneon1998 » Sat Apr 03, 2010 1:19 pm

has anybody every got cross drilled rotors from ebay are they any good

racer12306
Administrator
Posts: 726
Joined: Mon Feb 12, 2007 10:02 am
Location: Maryland

Post by racer12306 » Sat Apr 03, 2010 3:55 pm

Don't do it. Spend a few bucks and get known quality brakes.
Please PM or email me if you see any issues with the site.

racer12306@2gn.org

loroku
1GN Registrant
Posts: 22
Joined: Sat Apr 03, 2010 5:03 am
Location: janesville WI

Post by loroku » Sun May 09, 2010 3:51 pm

dont buy cross drilled they r just for looks they also do a connect the dots thing lol get some stock second gen rotors and hawk hp street pads if ur looking to stop faster this is what i have on mine its awesome vs stock rotors
taylor

okvol
1GN Registrant
Posts: 41
Joined: Wed Mar 24, 2010 11:30 am
Location: Enid, OK

Post by okvol » Sun May 09, 2010 11:03 pm

Buy good quality steel. My dad was a machinist, and there are varying qualities of steel. Cheap steel will warp, and you can feel it when they warp - the surging feeling as you brake.
Neon owner by choice.

jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Mon May 10, 2010 6:09 pm

I know people who have. They warp and crack to easy. Also if you buy drilled and slotted rotors be ready to change pads quite a lot more frequently. I think summit has some for not much more than the shitty ones on ebay.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

Boostedpdx
1GN Registrant
Posts: 86
Joined: Sat Nov 07, 2009 11:59 pm
Location: Washington, USA
Contact:

Post by Boostedpdx » Sun Aug 29, 2010 2:04 pm

If you want cross drilled / slotted go buy 2gn Rotora Rotors. They will fit they are just thicker. Add some hawk HPS pads with them and you will not regret it. Rotora is an excellent brand and you will not get warping or cracks. Used those on my srt4 and man did they run smooth. Great stopping power also.
Image
_____________________________________________
| Donate to nwneon.com | Project Log - 98 DOHC Expresso |
04 Srt-4 Stage II :Gone
99 R/t Hahn Stage II :Sold to 2themax

Post Reply