Proportioning valve
Proportioning valve
I have a 99 Dodge Neon with ABS and 4 wheel disc brakes. The
proportioning valve on the rear of the car back by the gas tank
started leaking brake fluid. Is this a sign of it being bad or other
problems? Does anyone have the Dodge part number for this
valve?
proportioning valve on the rear of the car back by the gas tank
started leaking brake fluid. Is this a sign of it being bad or other
problems? Does anyone have the Dodge part number for this
valve?
what prop valve is that...neon prop's are on the master cylinder...and metering is done through the abs hydraulic controller
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK
-
- 1GN Registrant
- Posts: 638
- Joined: Sun Mar 11, 2007 11:39 pm
- Location: Moro, Illinois
actually on abs cars the proportioning valve is on the abs actuator pack and I have no clue what valve is in the back of the car on the brakes unless hes seeing fluid leaking from above the fuel pump cover and is confusing it with a valve??? I think its just a rusted thru line and it should be repaired by a qualified technitian immeadiatly before it is driven again.
yeah, was thinking the hose block. on all first gens the props are on the master, including abs cars. can provide pix of my 95 and 98 both with abs and props on the master.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK
-
- 1GN Registrant
- Posts: 638
- Joined: Sun Mar 11, 2007 11:39 pm
- Location: Moro, Illinois
I've never seen it before but I surly believe it. My abs has them on the actuator block, both my non abs cars had it on the master cylinder. When I replaced my master cylinder on my abs car they never asked me if it had the propotioning valves on the master cylinder or not. The proportioning valves have different thread sizes then the normal lines so I know it would have caused a problem. Guess I learn something new everyday. Personally I'd just change it since its obviously not the lines as shown in the pics. It should just unbolt and the dealer would be able to get them for you.
wow, 9 neons owned and never seen em anywhere but off the master or off the abs unit. weird.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK