hydraulic clutch swap

Questions about axles, transmissions, differentials, pretty much anything that connects the engine to the wheels, this is the place for those questions.
Post Reply
neon95sohc
1GN n00b
Posts: 9
Joined: Wed Nov 10, 2010 7:04 pm
Location: Bowmanville, Ontario

hydraulic clutch swap

Post by neon95sohc » Thu Nov 25, 2010 12:11 am

has anyone ever converted their clutch from cable to hydrualic? i dunno about you guys but i have never had a worse foot cramp then i have had driving a neon in stop and go traffic
are the 2nd gens hydraulic and do you know if it is possible to do? maybe with a clutch set up from one of those?
95 SOHC
cold air
dohc muffler
its a start..

User avatar
jamieely
1GN Registrant
Posts: 429
Joined: Tue Feb 10, 2009 12:39 pm
Location: Greenwood, IN

Post by jamieely » Thu Nov 25, 2010 9:38 pm

It has been done. You can use the parts from a 2nd gen. You need to make some parts. You will also need a hydraulic clutch bellhousing from a 01+ neon, pt cruiser, or dsm tranny.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, AEM 3-bolt cam gear almost ready to bolt on

neon95sohc
1GN n00b
Posts: 9
Joined: Wed Nov 10, 2010 7:04 pm
Location: Bowmanville, Ontario

Post by neon95sohc » Sat Nov 27, 2010 12:55 pm

hmm does anyone have a pic of one thats been done? and do you know if you can still use your stock clutch or do you need the clutch from the pt too?
95 SOHC
cold air
dohc muffler
its a start..

Post Reply