need a ms map anyone help me?

Just install MegaSquirt or some other system that allows you to tune your car, or just have a question about tuning and the options available? Feel free to ask it here.
User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

need a ms map anyone help me?

Post by 1fast2liter » Wed Jun 11, 2008 2:41 pm

need a map for my car... somthing to get ... for now ill run the stock timimg unless some one has a good timming map. i would like somthing verified to 18-20 psi

running srt4 built 2.4.. 2.0 intake cam
srt4 turbo
srt4 stage 1 injectors
rfl bov
srt4 intercooler
returnline with 1:1 running a base pressure of 59psi


need a good base map to get it running and driving......thanks
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Wed Jun 11, 2008 7:12 pm

You could probably run and drive on my map. Just change the required fuel amount in the engine constants to match your setup. It is verified to 18psi. If you want it, give me your email and I will send you my .msq file.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Wed Jun 11, 2008 8:37 pm

sweet.. curious_george_98_99@yahoo.com


what is your setup?
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Wed Jun 11, 2008 8:59 pm

dohcrt i just read your logg really the only thing different your doing is running a 2.0 so theoreticaly i should be able to add 20% more fuel then what you have and go from their..... but since i also have 3 inch o2 and dp i mite need more... but your map should be a great start....... what code is it for though.. i got a older version then what out know.
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Thu Jun 12, 2008 12:08 am

I think its 029y4. If you don't have the latest firmware, you should upgrade.

Setting the constants correctly will increase the fuel for you. You will be better off setting the boost low (waste gate minimum) before you try it out. Torque is going to come earlier in the RPM for you engine than it does mine. You will notice that my VE table peaks around 4500 RPM. This is where my engine makes peak torque. Since yours will peak earlier, you will eventually have to change where the table peaks to compensate.

The spark table is very conservative so you shouldn't have to worry about having too much spark. Get the fuel worked out and then play with spark.

I have most of the enrichments tuned very well so it shouldn't be too hard to drive without changes.

I sent the msq file to your email.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Thu Jun 12, 2008 12:18 am

thanks. yeah i got the 029y4. i loaded it to megatune but says their are 26 warnings.. possible cause it wasnt hook to a unit? looks good though think i can use it even though i have a 2.5 bar map?
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Fri Jun 13, 2008 12:38 am

You will have to change some settings in the MT configurator. Be sure to setup for a 2.5 bar MAP sensor. A lot of the warnings are probably being caused by the fact that our hardware is different. You may want to create your own msq and just use my tables and enrichments.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Fri Jun 13, 2008 1:41 am

what do you mean by different. i just need to know what version megatune your using.
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Fri Jun 13, 2008 9:43 pm

2.25 p1

Different as in my MAP sensor is 3 bar and yours is 2.5 bar. Some outputs are different on the Super420A than a regular MS1. Also, I am using IGBT's instead of VB921's. You're going to have to lower the running dwell time if you are using VB921's.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Fri Jun 13, 2008 10:47 pm

ok.. ill have to look when i get it all loaded up....i looked it over and from what i understand their is really no difference between the 2 version just a fix on some things..... i notice your spark table goes to 300 kpa and your ve goes to 249 if i change the map i wont have to chande that will i?
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Sun Jun 15, 2008 2:42 pm

If you have it configured for the correct MAP sensor (2.5bar in your case), you should get an error for any setting over 250kpa. Change the highest kpa bin in the spark table to 250kpa and move the whole table up one line accordingly.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Tue Jun 17, 2008 11:18 pm

the highest setting in spark is 249kpa then the one above that is 44.. also dwell time is lowered to like 1.5 or somthing like that?
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Wed Jun 18, 2008 12:44 am

MT probably got confused and changed it to 44 for some reason. Dwell time with VB921's should be around 4.0ms. Cranking dwell is going to be high so don't worry about it. Be sure spark output inverted is set to YES in spark settings.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Wed Jun 18, 2008 1:49 am

ok ill look then..... on the decoder i dont need MSns set to on do i?
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

User avatar
1fast2liter
1GN Registrant
Posts: 1231
Joined: Thu Mar 01, 2007 3:30 am
Location: Beaver dam, WI

Post by 1fast2liter » Wed Jun 18, 2008 1:54 am

ok cranking dwell is 7.o and running dwell i lowered to 4.0ms that sounds right ? and the spark invert is set to yes.....
Image

96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out

current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub

90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too

Post Reply