8500rpm ecu?

Just install MegaSquirt or some other system that allows you to tune your car, or just have a question about tuning and the options available? Feel free to ask it here.
bpshn
1GN Registrant
Posts: 62
Joined: Sun Jul 15, 2007 5:07 pm

8500rpm ecu?

Post by bpshn » Sun Jul 15, 2007 5:31 pm

does anyone have knowledge of someone who can program a ecu to rev out at 8500 and still hold the same fuel map as a mopar per. ecu?
if you didn't break it, you wern't running it hard enough!!!

User avatar
fusion210
1GN Registrant
Posts: 597
Joined: Mon Feb 12, 2007 3:16 pm
Location: NC

Post by fusion210 » Sun Jul 15, 2007 6:03 pm

Nope, especially being that the code is copyrighted.
But what you supposedly can do is add your own piggyback, like megasquirt, to keep adding fuel after the pcm goes into fuel cut. Just something I've read.
Tons of info here http://forums.neons.org/viewtopic.php?t ... highlight=

bpshn
1GN Registrant
Posts: 62
Joined: Sun Jul 15, 2007 5:07 pm

Post by bpshn » Sun Jul 15, 2007 6:07 pm

for reasons better left un-told, a piggyback controller is out of the question. iv seen a ad from jet (i think) saying they can build whatever you want but they are slow at replying.
if you didn't break it, you wern't running it hard enough!!!

speedjunkie
BANNED
Posts: 141
Joined: Tue Feb 13, 2007 12:52 pm
Location: Pascagoula, Ms.

Post by speedjunkie » Sun Jul 15, 2007 6:36 pm

do a search on them over on neons.org and you will find some interesting information
"1gn.org" Crew Member #106
"I hate my turbo neon" Crew Member #1
Unnatural Motorsports Employee member #1
"The Original Three" Member #2

bpshn
1GN Registrant
Posts: 62
Joined: Sun Jul 15, 2007 5:07 pm

Post by bpshn » Sun Jul 15, 2007 7:02 pm

ive tried the search engine on .org and 4672 posts later i still didnt get a good read. do you have a direct post link?
if you didn't break it, you wern't running it hard enough!!!

User avatar
DOHCRT
1GN Registrant
Posts: 1225
Joined: Sat Mar 03, 2007 12:34 pm
Location: Columbus, OH

Post by DOHCRT » Sun Jul 15, 2007 9:37 pm

Highest revving PnP PCM I know of is the AFX race. As far as I know, Howell is the only company able to alter the neon's PCM. You may want to call them and see if they can program a PCM to your specs. Other than that, Megasquirt or a stand alone.
"Losers always whine about their 'best'. Winners go home and fuck the prom queen"

Project Log

bpshn
1GN Registrant
Posts: 62
Joined: Sun Jul 15, 2007 5:07 pm

Post by bpshn » Sun Jul 15, 2007 11:05 pm

no personal experence w/ the stand alone systems. shed some light on me.
if you didn't break it, you wern't running it hard enough!!!

User avatar
Lackof
1GN Registrant
Posts: 2599
Joined: Mon Feb 05, 2007 10:24 pm
Location: Jacksonville, FL

Post by Lackof » Mon Jul 16, 2007 6:57 am

bpshn wrote:no personal experence w/ the stand alone systems. shed some light on me.
neons.org has a full forum section devoted to it and a big FAQ on it.
Go there and read it i don't think anyone wants to explain it all here.

Stand alone = full control ... in the fewest words.

User avatar
Vinny
Administrator
Posts: 2246
Joined: Thu Jan 25, 2007 4:42 am
Location: Los Angeles
Contact:

Post by Vinny » Mon Jul 16, 2007 3:12 pm

And forget about Jet, from what I have heard the only independent dyno testing of a Jet ECU resulted in no HP gains. Megasquirt or other standalone used as a piggyback is going to be the only way to get a rev limiter higher than what you get with the AF/X Race.
suave23 wrote:Can you imagine how much pussy you'd pull if you had a pet monkey riding your pet dog with you everywhere you went?

bpshn
1GN Registrant
Posts: 62
Joined: Sun Jul 15, 2007 5:07 pm

Post by bpshn » Mon Jul 16, 2007 5:38 pm

got some answers. not the ones i wanted but, b&g chrysler can do the stock computers but they have to be in the car. the mopar per. ones they cant do. talked to jet and after about 30 sec. decided they were junior at it. ended up getting a full race open loop from howell. only 7800 rpm but its a learnable unit so i hope the programing outweighs a 700 rpm differental. thanks everyone for the imput.
if you didn't break it, you wern't running it hard enough!!!

User avatar
98DOHCSport
1GN Registrant
Posts: 293
Joined: Sat Mar 10, 2007 2:32 pm
Location: DuBois PA, 15801
Contact:

Post by 98DOHCSport » Thu Jul 26, 2007 8:54 pm

did you order it yet? What was the wait time they quoted you
98 PLAT Sports Coupe(fun)
98 White R/T(funner)
97 DOHC ACR Coupe(funnerest)

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Thu Jul 26, 2007 10:06 pm

afx race's should go over 8k unless they toned it down.

Honestly for the money you'll spend on the afx get the megasquirt. With megatune it'll pretty much take care of itself once you get the thing to idle. Some polishing is never bad but the autotuners that come w/ most of the standalone ems's are pretty damn good.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

User avatar
infil
Moderator
Posts: 674
Joined: Sat Feb 17, 2007 11:10 pm
Location: staten island, ny

Post by infil » Thu Jul 26, 2007 10:07 pm

oh, for megasquirt, go to www.rs-autosport.com hehe
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK

bpshn
1GN Registrant
Posts: 62
Joined: Sun Jul 15, 2007 5:07 pm

Post by bpshn » Thu Jul 26, 2007 10:31 pm

when i ordered it from howell they said id have it the first of the week(this last mon or tues) called today to see when it was shipped and a different guy told me 4-8 weeks. i kind of lost it at that time and said they lied to me to get the sale. i told them when i ordered it that if i couldnt have it in a week ,i didnt want it and would do something different. he said the guy that programs them is a retired mopar computer engineer and lives like he is retired. will take off and they wont hear from him for weeks at a time. told them they still lied to me to get the sale and sounded like they didnt care. PROBABLY THE TAST TIME I DEAL WITH THEM!!!!
if you didn't break it, you wern't running it hard enough!!!

sohcneon13x
1GN Registrant
Posts: 469
Joined: Mon Feb 12, 2007 4:47 pm
Location: SoMinneIoDawasotakota

Post by sohcneon13x » Fri Jul 27, 2007 9:00 am

Welcome to the I GOT SCREWED by HOWELL AUTOMOTIVE CLUB!
96 Plymouth Neon Sedan
SOHC/MTX(swapped!)
MOPAR Street Header/3.0 CAI/ATX TB/UDP/95 cam/ ........40+MPG HWY!

96 Plymouth Neon Expresso Coupe
SOHC/MTX
MOPAR ECU/ ATX TB/ 3.0 CAI/ MOPAR X-High Rates & KYB struts

97 Plymouth Neon sedan
DOHC/ATX ...soon to be MTX!
RECENTLY VANDALIZED AND TOTALED OUT!
rebuild?
MEMBER #52

Post Reply