Is this a good NA combo?What block prep work should I do?
-
- 1GN Registrant
- Posts: 21
- Joined: Sat Mar 03, 2007 11:25 pm
- Location: Washington Indiana 47501
Is this a good NA combo?What block prep work should I do?
Im about to build a NA 2.4 to drop in a 1gn coupe shell, What should I do to the block if anything? I plan on going with Eagle H beam rods, 12.1 forged pistons, crane 22's, fully ported head, long tube, Indy intake and 60 mm tb ,,UDP, fidanza light flywheel, A/FX race pcm, and a r/t 3.92 tranny...Is this a decent combo?
WANTED to buy, Performance parts for my stock 98 R/T
-
- 1GN n00b
- Posts: 14
- Joined: Sat Feb 24, 2007 3:11 am
- Location: Cudahy,WI
-
- 1GN Registrant
- Posts: 1231
- Joined: Thu Mar 01, 2007 3:30 am
- Location: Beaver dam, WI
maybe try a itb setup with it and go mega squrit to tune it right.... also use 24ld injectors.... you would get some hella power with that setup combined with this i mentioned.
96 blue coupe sold
96 white 4 door sold
95 blue sport parted out
97 straberrie red coupe sold
95 black base parted out
current drivers
97 dodge ram 1500 5.9 ext cab sport fire engine red. tinted windows cat back exhaust suer chips tune, 1 mephis audio sub
90 audi 80. 400 miles to the tank
2002 custom sportster 90 whp and quick too
-
- 1GN Registrant
- Posts: 21
- Joined: Sat Mar 03, 2007 11:25 pm
- Location: Washington Indiana 47501
Thanks guys, speaking of tuning, how hard is it to tune the megasquirt? Also the cam gear adjusting, Is that something that needs to be done on a dyno? How do I know where to adjust them? The "tuning" is what scares me the most. I know there will be alot of it to do to make this work and its something new to me. I guess I will have lots of questions in the future...Hope I dont get too annoying...Thanks again..
WANTED to buy, Performance parts for my stock 98 R/T
i'd probably lean with a pt trans as opposed to an rt trans. driving hard i killed first gen trannies alot wheni still drove mine onthe street.
I would probably stay away from the fidanza flywheel and go with a spec or a competition personally, but again, thats me. I have a bad taste whenit comes to fidanza, too many broken cam gears and flywheels for my taste
As far as your direct question as to what to do to the block, crank scraper for sure, I dont recall what 2.4 pans moroso has available, but i'm pretty sure they do have one, that would be a wise investment as well.
I would probably stay away from the fidanza flywheel and go with a spec or a competition personally, but again, thats me. I have a bad taste whenit comes to fidanza, too many broken cam gears and flywheels for my taste
As far as your direct question as to what to do to the block, crank scraper for sure, I dont recall what 2.4 pans moroso has available, but i'm pretty sure they do have one, that would be a wise investment as well.
Infil <--click
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK
AMSOIL, Technical Auto Group, S.I. J&V Tools
Fast Times Performance 2002 Subaru WRX 2.5, 11.936@113.18
95 All Motor Neon
13.958@96.99
SOHC - ALL MOTOR - STOCK BLOCK