Have a question related to Turbos, Nitrous, Supercharging, ect... ask it here.
-
97sohc10
- 1GN Registrant
- Posts: 66
- Joined: Tue Dec 21, 2010 10:21 pm
- Location: hanover pa
Post
by 97sohc10 » Wed Feb 23, 2011 11:07 pm
ok so all ive thought about doing was running n/a but just today my buddy decides he was gonna order a new t28 turbo setup for his 2g dsm and if gonna give me the t25. im not a stranger to boost but no where near an expert beside the turbo, pipeing, intercooler and that stuff what else would i need to have and to do. im on a small budget but it will be project. any help is greatly appreciated.
-
BaLLisTiK
- 1GN Registrant
- Posts: 661
- Joined: Tue Sep 21, 2010 10:31 pm
- Location: New Port Richey, FL
Post
by BaLLisTiK » Thu Feb 24, 2011 12:25 am
Small budget + boost = No solution.
Sorry but that's the way it is.
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.
-
srt4eh
- 1GN Registrant
- Posts: 496
- Joined: Sun Nov 16, 2008 12:56 am
- Location: Schofield Barracks, Hawaii
Post
by srt4eh » Thu Feb 24, 2011 6:18 am
Cheapest way to run boost is with a srt turbo setup. I don't know how easy it is to run the t25 from a Mitsubishi but I imagine it's not as easy
98 Neon R/T, 00 Neon, 06 Jeep GC SRT-8
-
BaLLisTiK
- 1GN Registrant
- Posts: 661
- Joined: Tue Sep 21, 2010 10:31 pm
- Location: New Port Richey, FL
Post
by BaLLisTiK » Thu Feb 24, 2011 7:28 pm
Yeah, and if you are boosting a stock engine, it's recommended you keep the boost under 8psi or you risk toasting your bottom end.
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.
-
97sohc10
- 1GN Registrant
- Posts: 66
- Joined: Tue Dec 21, 2010 10:21 pm
- Location: hanover pa
Post
by 97sohc10 » Fri Feb 25, 2011 6:44 pm
i was only planning on running like 6lbs till i can build another motor slowly but this is a prject to do in time like by the end of the year or something
-
BaLLisTiK
- 1GN Registrant
- Posts: 661
- Joined: Tue Sep 21, 2010 10:31 pm
- Location: New Port Richey, FL
Post
by BaLLisTiK » Fri Feb 25, 2011 7:55 pm
6lbs would be ideal, you just have to figure out the turbo installation.
boostless_98 wrote:I want to hear wat everyone has to say on the idea of right hand drive neon conversion. I know it can be gotten from australia.
Ianguilly wrote:Just drive from the passenger side.
-
97sohc10
- 1GN Registrant
- Posts: 66
- Joined: Tue Dec 21, 2010 10:21 pm
- Location: hanover pa
Post
by 97sohc10 » Sat Feb 26, 2011 7:51 pm
i planned on using the dsm injectors and a side mount besides colder plugs will i need to do anything timing wise
-
srt4eh
- 1GN Registrant
- Posts: 496
- Joined: Sun Nov 16, 2008 12:56 am
- Location: Schofield Barracks, Hawaii
Post
by srt4eh » Sun Feb 27, 2011 11:41 am
timing should be ok with low boost
98 Neon R/T, 00 Neon, 06 Jeep GC SRT-8