another srt4 issue

Working on a DOHC or 2.4L swap, or maybe you have some other idea and have some questions? Feel free to ask them here...
Post Reply
carboneon
1GN Registrant
Posts: 123
Joined: Wed Nov 04, 2009 9:59 am
Location: pennsylvania

another srt4 issue

Post by carboneon » Tue Feb 23, 2010 10:20 pm

heres my ?s
1.if i use a mopar srt4 pcm and engine harness could i use the dash and body harness from a normal 03 to 05 neon?
2. is there a way around the skim key?
3. if dodge only wants a vin and mileage for info does a mopar stage 1 pcm look for a skim code if its bought as an accesory part rather than came with it from factory?


i havent found a smashed srt4 yet but found an 03 non skim automatic car in a local yard thats y im asking
1995 sedan (2.5 daytona swap)
1995 sedan (2.4 srt swap)

User avatar
MrAngry
1GN Registrant
Posts: 44
Joined: Mon Feb 08, 2010 9:44 am
Location: Grand Forks, ND

Post by MrAngry » Wed Feb 24, 2010 4:38 pm

1 You should be able to use the regular neon harness but I am not 100% positive on that.

2 NO! Unless you tape the key to the module.

3 The PCM goes by the vin and should not need the skim code for anything.
98 Neon Coupe - 2.4 DOHC MTX
2004 Neon SXT - ATX - My fun car!!
Image

hybrid-srt2001
1GN Registrant
Posts: 34
Joined: Sat Jun 30, 2007 12:09 am

Post by hybrid-srt2001 » Thu Feb 25, 2010 10:18 pm

you can either buy the key for the srt skim module, or buy a brand new computer. once a pcm has seen a skim module it must always be hooked up to one.

carboneon
1GN Registrant
Posts: 123
Joined: Wed Nov 04, 2009 9:59 am
Location: pennsylvania

Post by carboneon » Thu Feb 25, 2010 10:21 pm

So if I buy a stage 1 kit that's brand new and it don't sense the skim day 1 it won't need 1
1995 sedan (2.5 daytona swap)
1995 sedan (2.4 srt swap)

User avatar
MrAngry
1GN Registrant
Posts: 44
Joined: Mon Feb 08, 2010 9:44 am
Location: Grand Forks, ND

Post by MrAngry » Fri Feb 26, 2010 3:23 pm

True.
98 Neon Coupe - 2.4 DOHC MTX
2004 Neon SXT - ATX - My fun car!!
Image

Post Reply