Working on a DOHC or 2.4L swap, or maybe you have some other idea and have some questions? Feel free to ask them here...
-
carboneon
- 1GN Registrant
- Posts: 123
- Joined: Wed Nov 04, 2009 9:59 am
- Location: pennsylvania
Post
by carboneon » Mon Jan 18, 2010 2:54 pm
I have an srt4 engine and a pre 03 2.4 crank and block can I swap the normal crank into the srt4 engine to avoid the crank sensor issue ?
-
98moparR/T
- 1GN Registrant
- Posts: 712
- Joined: Sun Jan 28, 2007 12:09 am
- Location: Harrisburg, PA
Post
by 98moparR/T » Mon Jan 18, 2010 9:19 pm
it would be easier to swap the rods and pistons from your srt4 block to your non ngc 2.4 block
Adam
member # 5
04 blue srt4 - tein ss coilovers, dsp tuned, mpx exhaust, agp hardline with greddy type S bov
04 black srt4 - sold
owned 6 other neons and more to come
-
carboneon
- 1GN Registrant
- Posts: 123
- Joined: Wed Nov 04, 2009 9:59 am
- Location: pennsylvania
Post
by carboneon » Mon Jan 18, 2010 9:51 pm
will i still be able to use the srt head?
-
98moparR/T
- 1GN Registrant
- Posts: 712
- Joined: Sun Jan 28, 2007 12:09 am
- Location: Harrisburg, PA
Post
by 98moparR/T » Mon Jan 18, 2010 11:41 pm
depends on the year of your older 2.4 block
Adam
member # 5
04 blue srt4 - tein ss coilovers, dsp tuned, mpx exhaust, agp hardline with greddy type S bov
04 black srt4 - sold
owned 6 other neons and more to come
-
carboneon
- 1GN Registrant
- Posts: 123
- Joined: Wed Nov 04, 2009 9:59 am
- Location: pennsylvania
Post
by carboneon » Wed Jan 20, 2010 9:13 pm
so far from the homework i have done the srt4 crank and the normal 2.4 crank share the same bearing size as well as the same rear main seal. the srt oil pump can be used on eather and the crank sensor is located in the same area. so it seems pretty likely that a 2.4 normal crank should fit in the srt block
-
98moparR/T
- 1GN Registrant
- Posts: 712
- Joined: Sun Jan 28, 2007 12:09 am
- Location: Harrisburg, PA
Post
by 98moparR/T » Thu Jan 21, 2010 9:13 am
id probably post this on the big .org they might know for sure
Adam
member # 5
04 blue srt4 - tein ss coilovers, dsp tuned, mpx exhaust, agp hardline with greddy type S bov
04 black srt4 - sold
owned 6 other neons and more to come
-
charger440neon2.0l
- 1GN Registrant
- Posts: 638
- Joined: Sun Mar 11, 2007 11:39 pm
- Location: Moro, Illinois
Post
by charger440neon2.0l » Sat Jan 23, 2010 3:16 pm
I think the position of the tone wheel is different so you would need to drill the block to put the crank sensor in the right position.
-
carboneon
- 1GN Registrant
- Posts: 123
- Joined: Wed Nov 04, 2009 9:59 am
- Location: pennsylvania
Post
by carboneon » Sat Jan 23, 2010 5:51 pm
Gunna compair both cranks tonight and see what's up will repost as soon as I figure things out and put this mystery to rest lol
-
carboneon
- 1GN Registrant
- Posts: 123
- Joined: Wed Nov 04, 2009 9:59 am
- Location: pennsylvania
Post
by carboneon » Sat Jan 23, 2010 11:19 pm
The tone ring is indead in a different position there actually on the complete oposit end of the crankshaft. It will not work
-
roysneon
- Moderator
- Posts: 836
- Joined: Thu Sep 27, 2007 11:50 am
- Location: Dartmouth, Nova Scotia
Post
by roysneon » Sun Jan 24, 2010 8:28 am
Yeah, that's been established for a while now, not so much of a mystery.
Now taking 1gn of the month submissions for free 1gn.org window decals! Details
here