2.4 differences?

98yoda · Post by **98yoda** » Thu Oct 29, 2009 4:30 pm

I was just wondering what the major differences were between the SRT 2.4 and the normal stratus 2.4? What internals could you take from the SRT and swap into the 2.4? And I was also wondering if an SRT crank would fit in a stratus 2.4?

DOHCRT · Post by **DOHCRT** » Thu Oct 29, 2009 6:31 pm

The biggest difference are the pistons, rods, and crank. The SRT also has a different oiling system. You can use the pistons and rods. The SRT crank has an NGC crank trigger, which would not work in an SBEC engine. You can use the SRT oil pump and pan.

Look at this N/A 2.4L rebuild kit from Modern. It includes most of the SRT components that can be used on the N/A 2.4L.

http://www.modernperformance.com/comple ... -1605.html

98yoda · Post by **98yoda** » Thu Oct 29, 2009 6:35 pm

Yea that's what I'm gonna be buying, but I bought the engine and the guy said it ran fine, but the teardown revealed a spun rod bearing, and the crank doesn't look to good. So I guess my actual question was about the crank, ill have to see if I can get it fixed. Thanks.

98yoda · Post by **98yoda** » Fri Oct 30, 2009 11:22 am

I don't have my spec sheets with me since im not home, but what valves would I be able to use in the 2.4 head? Iirc, the SRT were a little different.